Similitude theory allows engineers, through a set of tools known as similitude methods, to establish the necessary conditions to design a scaled (up or down) model of a full-scale prototype structure. In recent years, to overcome the obstacles associated with full-scale testing, such as cost and setup, research on similitude methods has grown and their application has expanded into many branches of engineering. The aim of this paper is to provide as comprehensive a review as possible about similitude methods applied to structural engineering and their limitations due to size effects, rate sensitivity phenomena, etc. After a brief historical introduction and a more in-depth analysis of the main methods, the paper focuses on similitude applications classified, first, by test article, then by engineering fields.

A system that has the capability to make instantaneous changes in its mass, stiffness, or damping may be termed a state-switchable dynamical system. Such a system will display different dynamical responses dependent upon its current state. For example, state-switchable stiffness may be practically obtained through the control of the termination impedance of piezoelectric stiffness elements. If such a switchable stiffness element is incorporated as part of the spring element of a vibration absorber, the change in stiffness causes a change in the resonance frequencies of the system, thereby instantaneously "retuning" the state-switched absorber to a new frequency. This paper briefly develops the fundamental analysis tools for a Single-Degree-of-Freedom state-switchable device, and then considers the application of such a device for the purpose of vibration control in a 2-DOF system. Simulation results indicate that state-switched vibration absorbers may be advantageous over classical passive tuned vibration absorbers under certain conditions.

This paper reviews the most significant works in literature about the acoustic behaviour of sandwich panels, starting from the first examples of multi-layered structures, comprising a series of different layers enclosing an air-gap, to the actual configurations in which the opportunities of emerging manufacturing technologies are considered in the design stages. The focus is on presenting an exhaustive list of dedicated and validated models, which are able to predict the sound transmission through sandwich panels according to their specific configuration. Some experimental works, aimed to the model correlations, are reviewed, too.