Fractional‐slot concentrated‐windings are appreciated for their simple construction, short end‐winding length, high copper fill factor, low cogging torque, good field‐weakening capability and fault‐tolerant ability. However, in comparison to the conventional distributed windings, the fractional‐slot concentrated‐windings are characterised with high space magnetomotive force (MMF) harmonics, which results in undesirable effects on the machine performance, such as localised core saturation, eddy current loss in the rotor and noise and vibration. In order to improve winding characteristics, several techniques have been developed recently. This manuscript introduces the 5 new winding topologies by using the general concept of stator slot shifting. It means that, in order to cancel undesirable MMF harmonics, by doubling (or tripling or even multiplying) the slot number and dividing the winding and then relatively shifting the winding by one (or more) slots, the undesirable harmonics have been eliminated effectively. The best choice is chosen according to the lowest amount of the MMF harmonic, highest value of winding factor and torque desirable characteristics. At the end, comprehensive comparisons for the designed synchronous reluctance motor (SynRel) equipped with proposed windings and also distributed winding are presented. The analytical study and 2D FEM analysis results show that it is possible to get an ideal low space‐harmonic winding topology, and consequently, a low torque ripple for these motors.