Herein, we present the synthesis of a nanocomposite blend of polyvinyl alcohol (PVA), polyethylene glycol (PEG), sodium nitrate (NaNO3), and various weight percent of nanofillers, BaTiO3, using a simple standard solution casting technique. The prepared nanocomposites are characterized in detail via techniques such as X‐ray diffraction technique, field‐emission scanning microscope, FTIR, and Raman spectra for confirming the crystal structure, morphology, and chemical bond formation within the samples, respectively. The suitable ionic conductivity of prepared samples is in the range of 10−4–10−8 S/cm at room temperature. Further, its maximum electrochemical stability window is ~4.1 V, and the ionic transference number is about 0.96 (15 wt%) at room temperature. The results associated with the optimized polymer nanocomposite motivated us to check its practical applicability for supercapacitors. The cyclic voltammetry of the fabricated cell based on optimized polymer as separator cum electrolyte appears as a distorted rectangle with no redox peaks. The cell charge storage mechanism is explored to be the electric double layer (EDLC) in nature. The maximum specific capacitance exhibited by the cell is nearly 4.4 F/g at a scan rate of 3 mV/s. The energy and power densities delivered by the same cell are equal to 27.7 W h kg−1 and 9972 W kg−1, respectively, which sustain for 100 cycles. The results of the designed cell reveal that both blend polymer composite electrolyte films and the composite electrode can be implemented to be used for EDLC supercapacitor.

New polymer blend composite electrolytes (PBCEs) were prepared by the solution casting technique using poly(vinyl alcohol) (PVA)-polyethylene glycol (PEG), sodium nitrate (NaNO3) as a doping salt and multiwalled carbon nanotubes (MWCNTs) as fillers. The X-ray diffraction pattern confirms the structural properties of the polymer blend composite films. FTIR investigations were carried out to understand the chemical properties and their band assignments. The ionic conductivity of the 10 wt % MWCNTs incorporated PVA-PEG polymer blend was measured as 4.32 × 10–6 S cm–1 at 20 °C and increased to 2.253 × 10–4 S/cm at 100 °C. The dependence of its conductivity on temperature suggests Arrhenius behavior. The equivalent circuit models that represent the R s(Q1(R1(Q2(R2(CR3))))) were used to interpret EIS data. The dielectric behavior of the samples was investigated by utilizing their AC conductance spectra, dielectric permittivity, dielectric constant (εi and εr), electric modulus (Mi and Mr), and loss tangent tan δ. The dielectric permittivity of the samples increases due to electrode polarization effects in low frequency region. The loss tangent’s maxima shift with increasing temperature; hence, the peak height rises in the high frequency region. MWCNTs-based polymer blend composite electrolytes show an enhanced electrochemical stability window (4.0 V), better transference number (0.968), and improved ionic conductivity for use in energy storage device applications.

No abstract

No abstract

No abstract