No abstract

The catalytic performance of a series of 1 wt % Pd/C catalysts prepared by the sol-immobilization method has been studied in the liquid-phase hydrogenation of furfural. The temperature range studied was 25–75 °C, keeping the H2 pressure constant at 5 bar. The effect of the catalyst preparation using different capping agents containing oxygen or nitrogen groups was assessed. Polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and poly (diallyldimethylammonium chloride) (PDDA) were chosen. The catalysts were characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The characterization data suggest that the different capping agents affected the initial activity of the catalysts by adjusting the available Pd surface sites, without producing a significant change in the Pd particle size. The different activity of the three catalysts followed the trend: PdPVA/C > PdPDDA/C > PdPVP/C. In terms of selectivity to furfuryl alcohol, the opposite trend has been observed: PdPVP/C > PdPDDA/C > PdPVA/C. The different reactivity has been ascribed to the different shielding effect of the three ligands used; they influence the adsorption of the reactant on Pd active sites.

Herein, we investigated the effect of the support modification (Sibunit carbon) with diazonium salts of Pd and Pd-Au catalysts on furfural hydrogenation under 5 bars of H2 and 50 °C. To this end, the surface of Sibunit (Cp) was modified with butyl (Cp-Butyl), carboxyl (Cp-COOH) and amino groups (Cp-NH2) using corresponding diazonium salts. The catalysts were synthesized by the sol immobilization method. The catalysts as well as the corresponding supports were characterized by Fourier transform infrared spectroscopy, N2 adsorption-desorption, inductively coupled plasma atomic emission spectroscopy, high resolution transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Hammet indicator method and X-ray photoelectron spectroscopy. The analysis of the results allowed us to determine the crucial influence of surface chemistry on the catalytic behavior of the studied catalysts, especially regarding selectivity. At the same time, the structural, textural, electronic and acid–base properties of the catalysts were practically unaffected. Thus, it can be assumed that the modification of Sibunit with various functional groups leads to changes in the hydrophobic/hydrophilic and/or electrostatic properties of the surface, which influenced the selectivity of the process.

Furfural is a high-value chemical, being the precursor of compounds such as furfuryl alcohol and tetrahydrofurfuryl alcohol. Pt is known as active for furfural hydrogenation, but the high price limits its exploitation and imposes the search for alternatives. Here we presented a Pt/Mo bimetallic system with enhanced catalytic activity for furfural hydrogenation. For comparison, monometallic Mo-and Ptsupported on activated carbon have been prepared by impregnation and sol-immobilization. The bimetallic Pt/Mo was prepared impregnating the Mo-AC catalyst with Pt, using Na 2 PtCl 4 as a precursor, PVA, and NaBH 4 as reducing agent. HR-TEM analyses on Pt/Mo catalyst showed Mocontaining agglomerates embedded in the carbon matrix, displaying diffraction fringes with spacing typical of Mo 4 O 11 in the orthorhombic phase, as well as Pt nanoparticles more evenly dispersed in the Mo-AC system compared to bare AC. The Pt/Mo catalyst showed higher activity than both monometallic ones, and it converted 92 % of furfural to furfuryl alcohol and ethyl furfuryl ether with 20 % and 80 % selectivity, respectively. However, despite a lower initial activity, the monometallic Mo/AC catalyst showed a complete selectivity to the ether.

No abstract