Nitrogen-vacancy (NV) in diamond possesses unique properties for the realization of novel quantum devices. Among the possibilities in the solid state, a NV defect center in diamond stands out for its robustness-its quantum state can be initialized, manipulated, and measured with high fidelity at room temperature. In this paper, we illustrated the formation kinetics of NV centers in diamond and their transformation from one charge state to another. The controlled scaling of diamond NV center-based quantum registers relies on the ability to position NV defect centers with high spatial resolution. Ion irradiation technique is widely used to control the spatial distribution of NV defect centers in diamond. This is addressed in terms of energetics and kinetics in this paper. We also highlighted important factors, such as ion struggling, ion channeling, and surface charging, etc. These factors should be considered while implanting energetic nitrogen ions on diamond. Based on observations of the microscopic structure after implantation, we further discussed post-annealing treatment to heal the damage produced during the ion irradiation process. This article shows that the ion implantation technique can be used more efficiently for controlled and efficient generation of NV color centers in diamond, which will open up new possibilities in the field of novel electronics and computational engineering, including the art of quantum cryptography, data science, and spintronics.

Recently direct current (DC) microgrids have drawn more consideration because of the expanding use of direct current (DC) energy sources, energy storages, and loads in power systems. Design and analysis of a standalone solar photovoltaic (PV) system with DC microgrid has been proposed to supply power for both DC and alternating current (AC) loads. The proposed system comprises of a solar PV system with boost DC/DC converter, Incremental conductance (IncCond) maximum power point tracking (MPPT), bi-directional DC/DC converter (BDC), DC-AC inverter and batteries. The proposed bi-directional DC/DC converter (BDC) lessens the component losses and upsurges the efficiency of the complete system after many trials for its components’ selection. Additionally, the IncCond MPPT is replaced by Perturb & Observe (P&O) MPPT, and a particle swarm optimization (PSO) one. The three proposed techniques’ comparison shows the ranking of the best choice in terms of the achieved maximum power and fast—dynamic response. Furthermore, a stability analysis of the DC microgrid system is investigated with a boost converter and a bidirectional DC-DC converter with the Lyapunov function for the system has been proposed. The complete system is designed and executed in a MATLAB/SIMULINK environment and validated utilizing an OPAL real-time simulator.

Abstract:In recent years, organic solar cells became more attractive due to their flexible power devices and the potential for low-cost manufacturing. Inkjet printing is a very potential manufacturing technique of organic solar cells because of its low material usage, flexibility, and large area formation. In this paper, we presented an overall review on the inkjet printing technology as well as advantages of inkjet-printing, comparison of inkjet printing with other printing technologies and its potential for organic solar cells (OSCs). Here we highlighted in more details about the viability of environment-friendly and cost-effective, non-halogenated indium tin oxide (ITO) free large scale roll to roll production of the OSC by inkjet printing technology. The challenges of inkjet printing like the viscosity limitations, nozzle clogging, coffee ring effect, and limitation of printability as well as dot spacing are also discussed. Lastly, some of the improvement strategies for getting the higher efficiency of the OSCs have been suggested.

No abstract

No abstract