No abstract

Previous research has linked high mobility group box 3 (HMGB3) overexpression to the malignant progression and poor prognosis of non-small cell lung cancer (NSCLC). The present study investigated the role of HMGB3 in cell survival and colony formation of NSCLC cells. Stable knockdown of HMGB3 in A549 cells was achieved by lentiviral-based shRNA interference and verified by detection of the transcriptional and translational level of HMGB3 with reverse transcription-quantitative polymerase chain reaction and western blotting, respectively. The influence of HMGB3 knockdown on A549 cell viability and apoptotic rate was evaluated by Cell Counting Kit-8 assay and flow cytometry following annexin V staining, respectively. The proliferative capacity of A549 cells with or without HMGB3 knockdown was compared by measuring their colony forming efficiency. The results of the current study revealed that HMGB3 knockdown significantly reduced cell viability and colony forming efficiency while promoting apoptosis in A549 cells, indicating that HMGB3 may be pivotal for the survival and colony formation of A549 cells, serving a notable role in NSCLC progression.

No abstract

In this paper, special optical fibers are embedded into 3-D braided carbon/epoxy composites to constitute intrinsic microbend fiber optic sensors for internal strain measurement. Samples with embedded optical fibers are braided through four-step method and processed through Resin Transfer Molding (RTM) process. Special measures are taken to prevent damage of the sensors. The microbend optic fiber sensor works well in a three-point bending experiment. The experiments show that the output intensity of the microbend sensor is proportional to the internal strain of the sample while the load increases. Similar results can be achieved as the load decreases.The results show that the embedded microbend fiber optic sensor is fit for internal strain measurement in 3-D braided composites.

Simultaneous strain and temperature measurement for advanced 3-D braided composite materials using fibre-optic sensor technology is demonstrated, for the first time. These advanced 3-D braided composites can virtually eliminate the most serious problem of delamination for conventional composites. A tandem in-fibre Bragg grating (FBG)/extrinsic Fabry-Perot interferometric sensor (EFPI) system with improved accuracy has been used to facilitate simultaneous temperature and strain measurement in this work. The non-symmetric distortion of the optical spectrum of the FBG, due to combination of the FBG and the EFPI, is observed for the first time. Experimental and theoretical studies indicate that this type of distortion can affect the measurement accuracy seriously and it is mainly caused by the modulation of the periodic output of the EFPI. A simple method has been demonstrated to improve the accuracy for detection of the wavelength-shift of the FBG induced by temperature change. A strain accuracy of and a temperature accuracy of -±l°C have been achieved, which can meet the requirements for practical applications of 3-D braided composites.