Abstract-This paper proposes a newly designed compact coplanarwaveguide-fed wideband circularly polarized (CP) printed square slot antenna (PSSA), in the square slot of which are a halberd-shaped feeding signal line and a square ring patch. By placing a specially designed metal reflector behind the bidirectional CP PSSA, one can obtain unidirectional CP patterns with a associated 3-dB axial-ratio bandwidth (ARBW) almost the same as that of the bidirectional antenna. The bidirectional L-and S -band PSSAs designed on FR4 substrates have 3-dB ARBWs as large as 25.3% and 29.1%, respectively. For the L-band antennas, the unidirectional design yields a 3-dB ARBW of 25.7% and a gain of about 3 dB higher than that of the bidirectional counterpart. In all these 3-dB axialratio bands, impedance matching with VSWR ≤ 2 is also achieved. Most importantly, the design concepts, procedures, and rules for the proposed antenna are presented in detail.

No abstract

A new easy-to-apply design procedure is proposed in this letter for constructing small wideband circularly polarized (CP) bidirectional and unidirectional square slot antennas. With an asymmetric T-shaped strip protruded from the signal line of the feeding coplanar waveguide (CPW) into the square slot, a reference antenna with a fractional 3-dB axial-ratio bandwidth (abbreviated as CPBW) of about 11% can be obtained. The proposed bidirectional CP slot antenna (BICPSA) can be modified from the reference antenna by stretching the left end of the T-shaped strip upward, by embedding a rectangular metal patch in the square slot, and by implanting a grounded metal strip from the right edge of the slot. The resulting BICPSA has a much larger CPBW of 39.1%, which is about 3.55 times that of the reference antenna. Finally, by placing a simple reflector underneath this BICPSA without changing its structural dimensions, one can obtain unidirectional radiation patterns with a greatly increased gain of 7.6 dBic, but with only a slightly decreased CPBW of 34.3%.

No abstract