Harvesting heat from the environment into electricity has the potential to power Internet-of-things (IoT) sensors, freeing them from cables or batteries and thus making them especially useful for wearable devices. We demonstrate a giant positive thermopower of 17.0 millivolts per degree Kelvin in a flexible, quasi-solid-state, ionic thermoelectric material using synergistic thermodiffusion and thermogalvanic effects. The ionic thermoelectric material is a gelatin matrix modulated with ion providers (KCl, NaCl, and KNO3) for thermodiffusion effect and a redox couple [Fe(CN)64–/Fe(CN)63–] for thermogalvanic effect. A proof-of-concept wearable device consisting of 25 unipolar elements generated more than 2 volts and a peak power of 5 microwatts using body heat. This ionic gelatin shows promise for environmental heat-to-electric energy conversion using ions as energy carriers.

Phototaxis is commonly observed in motile photosynthetic microorganisms. For example, green algae are capable of swimming towards a light source (positive phototaxis) to receive more energy for photosynthesis, or away from a light source (negative phototaxis) to avoid radiation damage or to hide from predators. Recently, with the aim of applying nanoscale machinery to biomedical applications, various inorganic nanomotors based on different propulsion mechanisms have been demonstrated. The only method to control the direction of motion of these self-propelled micro/nanomotors is to incorporate a ferromagnetic material into their structure and use an external magnetic field for steering. Here, we show an artificial microswimmer that can sense and orient to the illumination direction of an external light source. Our microswimmer is a Janus nanotree containing a nanostructured photocathode and photoanode at opposite ends that release cations and anions, respectively, propelling the microswimmer by self-electrophoresis. Using chemical modifications, we can control the zeta potential of the photoanode and program the microswimmer to exhibit either positive or negative phototaxis. Finally, we show that a school of microswimmers mimics the collective phototactic behaviour of green algae in solution.

This article reports the intelligent control of solar gain through windows based on the tunable scattering behaviors of temperature-responsive hydrogel particles. High luminous transmittance and broadband solar transmittance modulation including unprecedented IR modulation are simultaneously achieved for the first time using co-polymerized pNIPA-AEMA microparticles with prescribed particle size and internal structure. The design strategy to maneuver the real part of refractive index is applicable for broader fields beyond energy-saving smart windows.

Conventional thin-film composite (TFC) membranes suffer from the trade-off relationship between permeability and selectivity, known as the "upper bound". In this work, we report a high performance thin-film composite membrane prepared on a tannic acid (TA)-Fe nanoscaffold (TFC) to overcome such upper bound. Specifically, a TA-Fe nanoscaffold was first coated onto a polysulfone substrate, followed by performing an interfacial polymerization reaction between trimesoyl chloride (TMC) and piperazine (PIP). The TA-Fe nanoscaffold enhanced the uptake of amine monomers and provided a platform for their controlled release. The smaller surface pore size of the TA-Fe coated substrate further eliminated the intrusion of polyamide into the substrate pores. The resulting membrane TFC showed a water permeability of 19.6 ± 0.5 L m h bar, which was an order of magnitude higher than that of control TFC membrane (2.2 ± 0.3 L m h bar). The formation of a more order polyamide rejection layer also significantly enhanced salt rejection (e.g., NaCl, MgCl, NaSO, and MgSO) and divalent to monovalent ion selectivity (e.g., NaCl/MgSO). Compared to conventional TFC nanofiltration membranes, the novel TFC membrane successfully overcame the longstanding permeability and selectivity trade-off. The current work paves a new avenue for fabricating high performance TFC membranes.

Indoor photovoltaics are promising to enable self‐powered electronic devices for the Internet of Things. Here, reported is a triple‐anion CH3NH3PbI2−xBrClx perovskite film, of which the bandgap is specially designed for indoor light harvesting to achieve a record high efficiency of 36.2% with distinctive high open circuit voltage (Voc) of 1.028 V under standard 1000 lux fluorescent light. The involvement of both bromide and chloride suppresses the trap‐states and nonradiative recombination loss, exhibiting a remarkable ideality factor of 1.097. The introduction of chloride successfully restrains the halide segregation of iodide and bromide, stabilizing the triple‐anion perovskite film. The devices show an excellent long‐term performance, sustaining over 95% of original efficiency under continuous light soaking over 2000 h. These findings show the importance and potential of I/Br/Cl triple‐anion perovskite with tailored bandgap and suppressed trap‐states in stable and efficient indoor light recycling.