High concentrations of defects are introduced into nanoscale ZnO through non‐equilibrium processes and resultant blue emissions are comprehensively analyzed, focusing on defect origins and broad controls. Some ZnO nanoparticles exhibit very strong blue emissions, the intensity of which first increase and then decrease with annealing. These visible emissions exhibit strong and interesting excitation dependences: 1) the optimal excitation energy for blue emissions is near the bandgap energy, but the effective excitation can obviously be lower, even 420 nm (2.95 eV < Eg = 3.26 eV); in contrast, green emissions can be excited only by energies larger than the bandgap energy; and, 2) there are several fixed emitting wavelengths at 415, 440, 455 and 488 nm in the blue wave band, which exhibit considerable stability in different excitation and annealing conditions. Mechanisms for blue emissions from ZnO are proposed with interstitial‐zinc‐related defect levels as initial states. EPR spectra reveal the predominance of interstitial zinc in as‐prepared samples, and the evolutions of coexisting interstitial zinc and oxygen vacancies with annealing. Furthermore, good controllability of visible emissions is achieved, including the co‐emission of blue and green emissions and peak adjustment from blue to yellow.

Laser ablation of solid targets in the liquid medium can be realized to fabricate nanostructures with various compositions (metals, alloys, oxides, carbides, hydroxides, etc.) and morphologies (nanoparticles, nanocubes, nanorods, nanocomposites, etc.). At the same time, the post laser irradiation of suspended nanomaterials can be applied to further modify their size, shape, and composition. Such fabrication and modification of nanomaterials in liquid based on laser irradiation has become a rapidly growing field. Compared to other, typically chemical, methods, laser ablation/irradiation in liquid (LAL) is a simple and “green” technique that normally operates in water or organic liquids under ambient conditions. Recently, the LAL has been elaborately developed to prepare a series of nanomaterials with special morphologies, microstructures and phases, and to achieve one‐step formation of various functionalized nanostructures in the pursuit of novel properties and applications in optics, display, detection, and biological fields. The formation mechanisms and synthetic strategies based on LAL are systematically analyzed and the reported nanostructures derived from the unique characteristics of LAL are highlighted along with a review of their applications and future challenges.

Detecting target analytes with high specificity and sensitivity in any fluid is of fundamental importance to analytical science and technology. Surface-enhanced Raman scattering (SERS) has proven to be capable of detecting single molecules with high specificity, but achieving single-molecule sensitivity in any highly diluted solutions remains a challenge. Here we demonstrate a universal platform that allows for the enrichment and delivery of analytes into the SERSsensitive sites in both aqueous and nonaqueous fluids, and its subsequent quantitative detection of Rhodamine 6G (R6G) down to ∼75 fM level (10 −15 mol·L −1 ). Our platform, termed slippery liquidinfused porous surface-enhanced Raman scattering (SLIPSERS), is based on a slippery, omniphobic substrate that enables the complete concentration of analytes and SERS substrates (e.g., Au nanoparticles) within an evaporating liquid droplet. Combining our SLIPSERS platform with a SERS mapping technique, we have systematically quantified the probability, p(c), of detecting R6G molecules at concentrations c ranging from 750 fM (p > 90%) down to 75 aM (10 −18 mol·L −1 ) levels (p ≤ 1.4%). The ability to detect analytes down to attomolar level is the lowest limit of detection for any SERS-based detection reported thus far. We have shown that analytes present in liquid, solid, or air phases can be extracted using a suitable liquid solvent and subsequently detected through SLIPSERS. Based on this platform, we have further demonstrated ultrasensitive detection of chemical and biological molecules as well as environmental contaminants within a broad range of common fluids for potential applications related to analytical chemistry, molecular diagnostics, environmental monitoring, and national security.spectroscopy | sensing | SERS | slippery surfaces | nanoparticles