Electrode performance of the Na 2 Ti 3 O 7 electrode. (d) Charge/ discharge curves of a P2-Na 0.66 [Li 0.22 Ti 0.78 ]O 2 electrode and Na 3 Ti 2 (PO 4 ) 3 electrodes cycled in the voltage range of (e) 2.5−2.0 and (f) 2.0 and 0.0 V. (a) Reprinted with permission from ref 320.

Rechargeable lithium batteries have risen to prominence as key devices for green and sustainable energy development. Electric vehicles, which are not equipped with an internal combustion engine, have been launched in the market. Manganese- and iron-based positive-electrode materials, such as LiMn(2)O(4) and LiFePO(4), are used in large-scale batteries for electric vehicles. Manganese and iron are abundant elements in the Earth's crust, but lithium is not. In contrast to lithium, sodium is an attractive charge carrier on the basis of elemental abundance. Recently, some layered materials, where sodium can be electrochemically and reversibly extracted/inserted, have been reported. However, their reversible capacity is typically limited to 100 mAh g(-1). Herein, we report a new electrode material, P2-Na(2/3)[Fe(1/2)Mn(1/2)]O(2), that delivers 190 mAh g(-1) of reversible capacity in the sodium cells with the electrochemically active Fe(3+)/Fe(4+) redox. These results will contribute to the development of rechargeable batteries from the earth-abundant elements operable at room temperature.

Recently, lithium-ion batteries have been attracting more interest for use in automotive applications. Lithium resources are confi rmed to be unevenly distributed in South America, and the cost of the lithium raw materials has roughly doubled from the fi rst practical application in 1991 to the present and is increasing due to global demand for lithium-ion accumulators. Since the electrochemical equivalent and standard potential of sodium are the most advantageous after lithium, sodium based energy storage is of great interest to realize lithium-free high energy and high voltage batteries. However, to the best of our knowledge, there have been no successful reports on electrochemical sodium insertion materials for battery applications; the major challenge is the negative electrode and its passivation. In this study, we achieve high capacity and excellent reversibility sodium-insertion performance of hard-carbon and layered NaNi 0.5 Mn 0.5 O 2 electrodes in propylene carbonate electrolyte solutions. The structural change and passivation for hard-carbon are investigated to study the reversible sodium insertion. The 3-volt secondary Na-ion battery possessing environmental and cost friendliness, Na + -shuttlecock hard-carbon/NaNi 0.5 Mn 0.5 O 2 cell, demonstrates steady cycling performance as next generation secondary batteries and an alternative to Li-ion batteries.