Semitransparent organic solar cells (ST‐OSCs) offer potentially more opportunities in areas of self‐powered greenhouses and building‐integrated photovoltaic systems. In this work, the effort to use a combination of solution‐processable gold nanobipyramids (AuNBPs)‐based hole transporting layer and a low/high dielectric constant double layer optical coupling layer (OCL) for improving the performance of ST‐OSCs over the two competing indexes of power conversion efficiency (PCE) and average visible transmittance (AVT) is reported. The fabrication and characterization of the ST‐OSCs are guided, at design and analyses level, using the theoretical simulation and experimental optimization. The use of a low/high dielectric constant double layer OCL helps enhancing the visible light transparency while reflecting the near‐infrared (NIR) photons back into the photoactive layer for light harvesting. NIR absorption enhancement in the ST‐OSCs is realized through the AuNBPs‐induced localized surface plasmon resonance (LSPR). The weight ratio of the polymer donor to nonfullerene acceptor in the bulk heterojunction is adjusted to realize the maximum NIR absorption enhancement, enabled by the AuNBPs‐induced LSPR, achieving the high‐performance ST‐OSCs with a high PCE of 13.15% and a high AVT of 25.9%.

Improved efficiency and stability of the organic solar cells (OSCs) are the critical considerations for practical applications. The interface between the interlayer and bulk heterojunction has recently been shown as one of the weak links associated with the degradation in the nonfullerene acceptor (NFA)based OSCs. It shows that the removal of the interfacial chemical reactions between the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (INCN) moieties in NFA and poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT:PSS) hole extraction layer (HEL) is desired for enhancing the device stability. In this work, we show that the use of a bilayer MoO 3 /antimonene HEL favors the operational stability in OSCs through maintaining a high builtin potential and suppression of an undesired interfacial reaction between INCN moieties in NFA and the PEDOT structures in PEDOT:PSS. A power conversion efficiency of 16.68% is also obtained for the OSCs with a bilayer MoO 3 /antimonene HEL, prepared using a blend system of PM6:Y6, demonstrating its suitability for high-performance OSCs.

Flexible conductive electrodes are essential components for organic optoelectronic devices (OODs). One of the main challenges in the development of flexible OODs is to achieve an optimal combination of photoelectrical properties, enhanced flexibility and stability in transparent conductive electrodes (TCEs). In this work, highperformance flexible nonfullerene organic solar cells (OSCs) and polymer light-emitting diodes (PLEDs) based on TCEs of silver nanowires (AgNWs) encapsulated with an ultra-thin atomic layer deposited aluminum oxide (Al 2 O 3) have been demonstrated. The hybrid AgNWs/Al 2 O 3 composite electrodes with enhanced thermal, ambient and mechanical stabilities enable an efficient flexible transparent electrode with high transmittance and conductivity, which can synergistically optimize the device performance of nonfullerene OSCs and PLEDs. The maximum power conversion efficiency value of 7.03%, as well as a current efficiency of 7.26 cd A À 1 for flexible OSCs and PLEDs are achieved, respectively. Notably, excellent flexibility, long-term atmospheric and thermal stabilities have been systematically investigated and demonstrated. These results provide a new design platform for the fabrication of high-performance, flexible transparent electrodes, which can be further explored in a wide range of organic optoelectronics field.

No abstract

Improved performance in flexible organic light-emitting diodes (OLEDs) is demonstrated by using a hybrid nanostructured plasmonic electrode consisting of silver nanowires (AgNWs) decorated with silver nanoparticles (AgNPs) and covered by exfoliated graphene sheets. Such all-solution processed electrodes show high optical transparency and electrical conductivity. When integrated in an OLED with super yellow polyphenylene vinylene as the emissive layer, the plasmon coupling of the NW-NP hybrid plasmonic system is found to significantly enhance the fluorescence, demonstrated by both simulations and photoluminescence measurements, leading to a current efficiency of 11.61 cd A -1 and a maximum luminance of 20008 cd m -2 in OLEDs.Stress studies reveal a superior mechanical flexibility to the commercial indium-tinoxide (ITO) counterparts, due to the incorporation of exfoliated graphene sheets. Our results show that these hybrid nanostructured plasmonic electrodes can be applied as an effective alternative to ITO for use in high-performance flexible OLEDs.