Mixed convection along vertical cylinders and needles with uniform surface heat flux is investigated for the entire mixed convection regime. A single modified buoyancy parameter χ and a single curvature parameter Λ are employed in the analysis such that a smooth transition from pure forced convection (χ = 1) to pure free convection (χ = 0) can be accomplished. For large values of the curvature parameter and/or Prandtl number, the governing transformed equations become stiff. Thus, a numerically stable finite-difference method is employed in the numerical solution in conjunction with the cubic spline interpolation scheme to overcome the difficulties that arise from the stiffness of the equations. Local Nusselt numbers are presented for 0.1 ≤ Pr ≤ 100 that cover 0 ≤ χ ≤ 1 (∞ ≥ Ωχ ≥ 0) and 0 ≤ Λ ≤ 50. For needles (Λ ≥ 5), the local Nusselt numbers Nuχ/(Reχ1/2 + Grχ*1/5) are found to be nearly independent of the buoyancy parameter χ. Correlation equations for the local Nusselt numbers are also presented.

No abstract

It is very difficult to fabricate tunable optical systems having an aperture below 1000 micrometers with the conventional means on macroscopic scale. Krogmann et al. (J. Opt. A 8, S330-S336, 2006) presented a MEMS-based tunable liquid micro-lens system with an aperture of 300 micrometers. The system exhibited a tuning range of back focal length between 2.3mm and infinity by using the electrowetting effect to change the contact angle of the meniscus shape on silicon with a voltage of 0-45 V. However, spherical aberration was found in their lens system. In the present study, a numerical simulation is performed for this same physical configuration by solving the Young-Laplace equation on the interface of the lens liquid and the surrounding liquid. The resulting meniscus shape produces a back focal length that agrees with the experimental observation excellently. To eliminate the spherical aberration, an electric field is applied on the lens. The electric field alters the Young-Laplace equation and thus changes the meniscus shape and the lens quality. The numerical result shows that the spherical aberration of the lens can be essentially eliminated when a proper electric field is applied.

There are still many unanswered questions related to the problem of a capillary surface rising in a tube. One of the major questions is the evolution of the liquid meniscus shape. In this paper, a simple geometry method is proposed to solve the force balance equation on the liquid meniscus. Based on a proper model for the macroscopic dynamic contact angle, the evolution of the liquid meniscus, including the moving speed and the shape, is obtained. The wall condition of zero dynamic contact angle is allowed. The resulting slipping velocity at the contact line resolves the stress singularity successfully. Performance of the present method is examined through six well-documented capillary-rise examples. Good agreements between the predictions and the measurements are observable if a reliable model for the dynamic contact angle is available. Although only the capillary-rise problem is demonstrated in this paper, the concept of this method is equally applicable to free surface flow in the vicinity of a contact line where the capillary force dominates the flow.

No abstract