Aluminium metal matrix composite is a relatively new material that has proved its position in automobile, aerospace and other engineering design applications due to its wear resistance and substantial hardness. Need for improved tribological performance has led to the design and selection of newer variants of the composite. The present investigation deals with the study of wear behaviour of Al-SiCp metal matrix composite for varying reinforcement content, applied load, sliding speed and time. Aluminium metal matrix composites reinforced with SiC particles are prepared by liquid metallurgy route using LM6 aluminium alloy and silicon carbide particles (size ~ 37 µm) by varying the weight fraction of SiC in the range of 5% -10%. The material is synthesized by stir casting process in an electric melting furnace. The materials are then subjected to wear testing in a multitribotester using block on roller configuration. A plan of experiments based on L27 Taguchi orthogonal array is used to acquire the wear data in a controlled way. An analysis of variance is employed to investigate the influence of four controlling parameters, viz., SiC content, normal load, sliding speed and sliding time on dry sliding wear of the composites. It is observed that SiC content, sliding speed and normal load significantly affect the dry sliding wear. The optimal combination of the four controlling parameters is also obtained for minimum wear. The microstructure study of worn surfaces indicates nature of wear to be mostly abrasive.

The present study considers an experimental study of tribological performance of Al-7.5% SiCp metal matrix composite and optimization of tribological testing parameters based on the Taguchi method coupled with grey relational analysis. A grey relational grade obtained from grey relational analysis is used as a performance index to study the behaviour of Al-7.5% SiCp MMC with respect to friction and wear characteristics. The tribological experiments are carried out by utilizing the combinations of tribological test parameters based on the L27 Taguchi orthogonal design with three test parameters, namely, load, speed, and time. The material Al-7.5% SiCp metal matrix composite is developed by reinforcing LM6 aluminium alloy with 7.5% (by weight) SiC particle of 400 mesh size (~37 μm) in an electric melting furnace. It is observed that sliding time has a significant contribution in controlling the friction and wear behaviour of Al-7.5% SiCp MMC. Furthermore, all the interactions between the parameters have significant influence on tribological performance. A confirmation test is also carried out to verify the accuracy of the results obtained through the optimization problem. In addition, a scanning electron microscopy (SEM) test is performed on the wear tracks to study the wear mechanism.

No abstract

e present paper considers the friction performance of Al-10%SiCp reinforced metal matrix composites against steel for varying tribological test parameters. e composite is prepared by stir-casting process using aluminium alloy LM6 being mixed with 10% silicon carbide by weight. e tribological tests are performed by varying applied load, sliding speed, and time. e friction performance is studied using plate-on-roller con�guration in a multitribotester and optimized using Taguchi L 27 orthogonal array. Analysis of variance (AN�VA) is performed to observe the signi�cance of test parameters and their interactions on friction performance. It is observed that normal load and the interaction between normal load and speed in�uence the friction behaviour, signi�cantly. e wear tracks are analyzed with the help of scanning electron microscopy.

No abstract