The present experimental work is performed to investigate the convection heat transfer (HT), pressure drop (PD), irreversibility, exergy efficiency and thermal performance for turbulent flow inside a uniformly heated circular channel fitted with novel geometry of hybrid tape. Air is taken as the working fluid and the Reynolds number is varied from 10,000 to 80,000. Hybrid tape is made up of a combination of grooved spring tape and wavy tape. The results obtained with the novel hybrid tape show significantly better performance over individual tapes. A correlation has been developed for predicting the friction factor (f) and Nusselt number (Nu) with novel hybrid tape. The results of this investigation can be used in designing heat exchangers. This paper also presented a statistical analysis of the heat transfer and fluid flow by developing an artificial neural network (ANN)-based machine learning (ML) model. The model is trained based on the features of experimental data, which provide an estimation of experimental output based on user-defined input parameters. The model is evaluated to have an accuracy of 98.00% on unknown test data. These models will help the researchers working in heat transfer enhancement-based experiments to understand and predict the output. As a result, the time and cost of the experiments will reduce.

In the present study, the heat transfer and thermal performance of a helical corrugation with perforated circular disc solar air-heater tubes are predicted using a machine learning regression technique. This paper describes a statistical analysis of heat transfer by developing an artificial neural network-based machine learning model. The effects of variation in the corrugation angle (θ), perforation ratio (k), corrugation pitch ratio (y), perforated disc pitch ratio (s), and Reynolds number have been analyzed. An artificial neural network model is used for regression analysis to predict the heat transfer in terms of Nusselt number and thermohydraulic efficiency, and the results showed high prediction accuracies. The artificial neural network model is robust and precise, and can be used by thermal system design engineers for predicting output variables. Two different models are trained based on the features of experimental data, which provide an estimation of experimental output based on user-defined input parameters. The models are evaluated to have an accuracy of 97.00% on unknown test data. These models will help the researchers working in heat transfer enhancement-based experiments to understand and predict the output. As a result, the time and cost of the experiments will reduce.

No abstract

No abstract

No abstract