No abstract

In this work, the Cs doped sol-gel ZnO film (ZnO:Cs) as efficient and robust electron transporting layer (ETL) in versatile systems of organic solar cells (OSCs) is developed, which can be simply formulated by blending the Cs2CO3 with the Zn(Ac)2 precursor in solutions. The Cs doping significantly increased the ZnO film conductivity and lowered its work function, as unveiled by the conductive atomic force microscope and the ultra-violet photoelectron spectroscopy. Decent device performance enhancements of OSCs with versatile photovoltaic materials, e.g. P3HT:PC61BM, P3HT:ICBA, and PTB7:PC71BM, were observed with the doped ZnO:Cs as the ETL compared with the pristine ZnO ETL. The enhanced device performance was also found in the tandem solar cells. Moreover, the device performance shows little drop with the thickness of the doped ZnO:Cs ETL ranging from 40 to 520 nm, indicating the less thickness dependence for the doped ZnO:Cs ETL. The current work verifies the potential of the Cs doped ZnO as a high performance ETL material for printable OSCs.

Employing metal anodes can greatly increase volumetric/gravimetric energy density versus a conventional ion-insertion anode. However, metal anodes are plagued by dendrites, corrosion, and interfacial side reactions issues. Herein, a compact and flexible amorphous MOF layer was successfully synthesized and used as protective layer on metal anode aqueous zinc-ion battery (AZIB). Compared with the crystalline MOF layer, the unique amorphous MOF layer can inhibit dendrite growth at the grain boundary and eliminate ions migration near the grain boundary, showing high interfacial adhesion and large ion migration number (tZn2+ = 0.82). Besides, the amorphous MOF layer can effectively depress unfavored behaviors, e.g., corrosion of zinc anode, hydrogen evolution reaction, and dendrite growth on zinc surface. The prepared Zn anode with the amorphous MOF layer exhibited an ultra-long cycle life (ten months, 7000 h) and a low voltage (< 40 mV) at 1 mA cm-2 in a symmetrical cell. Even at 10 mA cm-2, it still showed a high stability for more than 5500 cycles (1200 h). The enhanced performance is realized for full cells paired with a MnO2 cathode. Besides, a flexible symmetrical battery with the Zn@A-ZIF-8 anode exhibited a good cyclability under different bending angle (0°, 90°, and 180°). Moreover, various metal substrates were successfully coated with compact A-ZIF-8. The A-ZIF-8 layer can obviously improve the stability metal anodes, including Zn, Mg and Al. The results not only demonstrate the high potential of amorphous MOFs decorated Zn anodes for AZIBs, but also propose a new family of protective layers for metal anodes.