No abstract

Although the engineering of visible-light-driven photocatalysts with appropriate bandgap structures is beneficial for generating hydrogen (H2), the construction of heterojunctions and energy band matching are extremely challenging. In this study, In2O3@Ni2P (IO@NP) heterojunctions are attained by annealing MIL-68­(In) and combining the resulting material with NP via a simple hydrothermal method. Visible-light photocatalysis experiments validate that the optimized IO@NP heterojunction exhibits a dramatically improved H2 release rate of 2485.5 μmol g–1 h–1 of 92.4 times higher than that of IO. Optical characterization reveals that the doping of IO with an NP component promotes the rapid separation of photo-induced carriers and enables the capture of visible light. Moreover, the interfacial effects of the IO@NP heterojunction and synergistic interaction between IO and NP that arises through their close contact mean that plentiful active centers are available to reactants. Notably, eosin Y (EY) acts as a sacrificial photosensitizer and has a significant effect on the rate of H2 generation under visible light irradiation, which is an aspect that needs further improvement. Overall, this study describes a feasible approach for synthesizing promising IO-based heterojunctions for use in practical photocatalysis.

Comprehensive Summary Carbon dioxide (CO2) capture is one of the most important aspects of reducing global warming. In terms of CO2 capture, metal‐organic frameworks (MOFs) have several advantages. However, it isn't easy to shape MOFs while maintaining their performance. Herein, we describe the development of a pellet‐shaped ultramicroporous MOF, Ni(3‐ain)2 (3‐ain = 3‐aminoinoisonicotinic acid), that is capable of selectively adsorbing CO2. Polyvinyl butyral (PVB) is used as a binder during the production of Ni(3‐ain)2 MOF pellets. The adequately shaped material can maintain its crystallinity and exhibit a high CO2 adsorption capacity (3.73 mmol·g–1) at ambient conditions, which is significantly greater than those obtained for N2 (0.63 mmol·g–1) and CO (0.90 mmol·g–1). Consequently, this material displays high IAST selectivities for CO2/N2 (26.3, 15/85, V/V) and CO2/CO (19.2, 1/99, V/V). According to the theoretical calculations, Ni(3‐ain)2 preferentially adsorbs CO2 molecules over N2 molecules and CO molecules. The results of experiments on dynamic breakthrough have demonstrated that Ni(3‐ain)2 pellets are capable of effectively separating CO2/N2 or CO2/CO mixtures under conditions of dynamic flow. Furthermore, the structured MOF materials can be synthesized in one step at kilogram scale. This work provides an avenue for the shaping of MOFs for potential industrial applications in the future.

No abstract

Chloroform is a volatile organic solvent and a contaminant that is slightly soluble in water, making the reversible separation of chloroform from water a critical and challenging task within the chemical and environmental industries. In this study, we present a newly developed coordination framework, [Zn(4-pmntd)(opa)] [4-pmntd, N,N′-bis(4pyridylmethyl)naphthalene diimide; opa, o-phthalic acid], which demonstrates a high adsorption capacity for chloroform (2.5 mmol/g) and an excellent ability to separate chloroform from water. The effectiveness of chloroform extraction by Zn(4-pmntd)(opa) was confirmed through vapor sorption, grand canonical Monte Carlo simulation, and 1 H nuclear magnetic resonance spectroscopy. The porous framework was also utilized to create a filtration film using natural rubber, which successfully separated chloroform from water with a minimum test concentration of approximately 1 × 10 −6 mol/L and a chloroform purity of 99.2%. [Zn(4-pmntd)(opa)] therefore has significant potential for lowenergy separation and recycling of chloroform from water under ambient conditions.