Transmitted external daylight through semitransparent type building integrated photovoltaic (BIPV) windows can alter the visible daylight spectrum and render different colors, which can have an impact on building’s occupants’ comfort. Color properties are defined by the color rendering index (CRI) and correlated color temperature (CCT). In this work, a less explored color comfort analysis of N719 dye-sensitized TiO2 based dye-sensitized solar cell (DSSCs) BIPV window was characterized and analyzed after 2 years of ambient exposure. Three different DSSCs were fabricated by varying TiO2 thickness. The reduced average visible transmission was observed while enhanced color properties were obtained for all three DSSCs. This study could pave way to future developments in the area of BIPV technology using DSSC in terms of their long-term exploration.

The rapid efficiency enhancement of perovskite solar cells (PSCs) make it a promising photovoltaic (PV) research, which has now drawn attention from industries and government organizations to invest for further development of PSC technology. PSC technology continuously develops into new and improved results. However, stability, toxicity, cost, material production and fabrication become the significant factors, which limits the expansion of PSCs. PSCs integration into a building in the form of building-integrated photovoltaic (BIPV) is one of the most holistic approaches to exploit it as a next-generation PV technology. Integration of high efficiency and semi-transparent PSC in BIPV is still not a well-established area. The purpose of this review is to get an overview of the relative scope of PSCs integration in the BIPV sector. This review demonstrates the benevolence of PSCs by stimulating energy conversion and its perspective and gradual evolution in terms of photovoltaic applications to address the challenge of increasing energy demand and their environmental impacts for BIPV adaptation. Understanding the critical impact regarding the materials and devices established portfolio for PSC integration BIPV are also discussed. In addition to highlighting the apparent advantages of using PSCs in terms of their demand, perspective and the limitations, challenges, new strategies of modification and relative scopes are also addressed in this review.

The stability of perovskite solar cells (PSC) is often compromised by the organic hole transport materials (HTMs). We report here the effect of WO3 as an inorganic HTM for carbon electrodes for improved stability in PSCs, which are made under ambient conditions. Sequential fabrication of the PSC was performed under ambient conditions with mesoporous TiO2/Al2O3/CH3NH3PbI3 layers, and, on the top of these layers, the WO3 nanoparticle-embedded carbon electrode was used. Different concentrations of WO3 nanoparticles as HTM incorporated in carbon counter electrodes were tested, which varied the stability of the cell under ambient conditions. The addition of 7.5% WO3 (by volume) led to a maximum power conversion efficiency of 10.5%, whereas the stability of the cells under ambient condition was ∼350 h, maintaining ∼80% of the initial efficiency under light illumination. At the same time, the higher WO3 concentration exhibited an efficiency of 9.5%, which was stable up to ∼500 h with a loss of only ∼15% of the initial efficiency under normal atmospheric conditions and light illumination. This work demonstrates an effective way to improve the stability of carbon-based perovskite solar cells without affecting the efficiency for future applications.

No abstract

Temperature-dependent studies on carbon-based perovskite solar cells (c-PSCs) manifest a less explored area of research compared with the numerous studies on improving the power conversion efficiency (PCE) and stability of...