Ionic polymer–metal composites (IPMCs) are a class of ionic actuators considered as potential candidates for future soft electronics that are operable under low voltages (generally <10 V), flexible, lightweight, and can be miniaturized. However, IPMCs can only generate linear bending deformation, but not complex 3D deformation, thus limiting their practical application. Herein, the IPMC actuators with anisotropic stripe microstructures are developed inspired by the botanical systems where microstructural anisotropy of the cell walls can lead to dynamic conformations. The stripe microstructure obtained via one‐way polishing is designed to present a certain angle to the edges of the IPMCs in the longitudinal direction and can be localized. Hence, the IPMCs are subjected to the anisotropic action of the microstructure while bending, yielding a complex 3D deformation. In addition, the large surface area and high ion accessibility area caused by polishing can enhance the actuation performance of IPMCs which is also influenced by the stripe angle, including higher displacement (up to 162%) and larger blocking force (up to 226%). Outstanding electromechanical properties and multimodal deformation model of IPMC actuators with microstructure are demonstrated by applications such as a soft switch, robotic gripper, and imitation of plant organs. This study can open a new vista for making high‐performance actuators and has significant implications for the expansion of the applicability of IPMC actuators.

Fiber-reinforced composites are an ideal high-performance composite material made from a combination of high-strength continuous fibers and a polymer matrix. Compared to short cut fibers, continuous long strand fibers can improve the mechanical properties of fiber composites more effectively. Herein, continuous aramid fiber-reinforced PLA filaments with fiber centering were prepared by modifying the outlet design of a desktop-grade thermoplastic single-screw melt extruder. Inspired by the cross-laminated structure of a beetle’s mandible fibers, a biomimetic structure composite was printed, which demonstrates a significant influence on the mechanical properties. The G-code printing program was developed, and the microstructure of the fracture surface of the specimen was analyzed. The uniform and orderly arrangement of aramid fibers within the PLA resin-based 3D-printed specimen was found. Consequentially, the bionic composites exhibits a 12% increase in tensile strength and a 5% increase in impact toughness, confirming the feasibility of utilizing continuous 3D printing to manufacture long bundles of aramid fiber composite filaments for enhanced mechanical performances.

Purpose: Insufficient osseointegration and implant-associated infection are major factors in the failure of Ti-based implants, thus spurring scientists to develop multifunctional coatings that are better suited for clinical requirements. Here, a new biomimetic micro/nanoscale topography coating combined with antibacterial copper was simultaneously designed for Ti-based implant surfaces by adopting a hybrid approach combining plasma electrolytic oxidation and hydrothermal treatment.Results: The biological interactions between this biofunctionalized material interface and stem cells promoted cellular adhesion and spreading during initial attachment and supported cellular proliferation for favorable biocompatibility. Bone marrow mesenchymal stem cells (BMMSCs) on the coating displayed enhanced cellular mineral deposition ability, higher alkaline phosphatase activity, and upregulated expression of osteogenic-related markers without the addition of osteoinductive chemical factors, which improved osseointegration. More interestingly, this new coating reduced the viability of oral pathogens (Fusobacterium nucleatum and Porphyromonas gingivalis)—the primary causes of implant-associated infections as indicated by damage of cellular structures and decreased population. This is the first study investigating the antibacterial property of dental implants modified by a hybrid approach against oral pathogens to better mimic the oral environment.Conclusion: These findings suggest that biofunctionalization of the implant coating by surface modification methods and the incorporation of antibacterial copper (Cu) offer superior osteogenesis capability and effective antibacterial activity, respectively. These strategies have great value in orthopedic and dental implant applications.

Repeat firing produces uncertainty about stabilizing lithium disilicate glass-ceramic (LDGC) material properties, even though prolonged holding time can enhance the mechanical property of LDGC during a single firing cycle. However, the effect of prolonged holding time and repeat firing on the mechanical property and microstructure of LDGC is not fully understood. In the present study, three groups of LDGC material were created: (i) extension of holding time (7 vs. 14 vs. 28 min) at 780–800 °C; (ii) holding time extension (7 vs. 14 min) and dual sintering at 800–820 °C, respectively; (iii) dual sintering with prolonged holding time (7 vs. 14 min) at 820–840 °C. The nano-indenter test revealed that prolonged holding time (14 and 28 min) promoted the enhancement of LDGC hardness and Young’s modulus. X-ray photoelectron spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy confirmed that prolonged holding time increased and stabilized LD phase in LDGC, as well as induced residual compressive stress. Scanning electron microscopy showed that prolonged holding time increased LD crystal grains homogeneously and facilitated LDGC to form dense interlocking structure without enlarging crystal size grains significantly. In contrast, LDGC that dual sintered alone at 820–840 °C possessed inferior mechanical properties, coupled with heterogeneous crystal phases, residual tensile stress, and melted crystals grains in the porous microstructure. Interestingly, these deteriorated properties of LDGC caused by dual sintering alone could be counteracted by prolonging the holding time. Nevertheless, the LDGC materials displayed an excellent biocompatibility throughout the study. This study identified that prolonged holding time during repeated firing cycles stabilized LD phase and crystal grain size of LDGC, thus enhanced the mechanical properties, which provided a new insight to extend the repeat fired restoration longevity of LDGC.