A waveguide coupled surface plasmon sensor for detection of liquid with high refractive index (RI) is designed based on polymer materials. The effects of variation of the thickness of the Au film, polymethyl methacrylate (PMMA) buffer, and waveguide layer on the sensing performance of the waveguide are comprehensively investigated by using the finite difference method. Numerical simulations show that a thinner gold film gives rise to a more sensitive structure, while the variation of the thickness of the PMMA buffer and waveguide layer has a little effect on the sensitivity. For liquid with high RI, the sensitivity of the sensor increases significantly. When RI of liquid to be measured increases from 1.45 to 1.52, the sensitivity is as high as 4518.14nm/RIU, and a high figure of merit of 114.07 is obtained. The waveguide coupled surface plasmon RI sensor shows potential applications in the fields of environment, industry, and agriculture sensing with the merits of compact size, low cost, and high integration density.

A metal-clad planar polymer waveguide refractive index sensor based on epoxy (EPO) polymer materials by using light intensity interrogation at 850 nm is designed. The polymethyl methacrylate (PMMA) material is deployed as the low refractive index (RI) buffer layer in order to better couple the optical guided mode and the surface plasmon polaritons (SPP) mode for working in water environment. The effects of the gold film thickness, PMMA buffer layer thickness, waveguide layer thickness, waveguide width, and gold length on the sensor sensing characteristics have been comprehensively studied. Simulation results demonstrate that the normalized transmission increases quasi-linearly with the increment of RI of the analyte from 1.33 to 1.46. The sensitivity is 491.5 dB/RIU, corresponding to a high RI resolution of 2.6×10−9 RIU. The designed SPP-based optical waveguide sensor is low-cost, wide-range, and high-precision, and has a broad application prospect in biochemical sensing with merits of miniaturization, flexibility, and multiplexing.

No abstract

No abstract

A high-resolution and wide-range pressure sensor based on π phase-shifted fiber Bragg grating (π-FBG) encapsulated with metal thin-walled cylinder is reported. The sensor has been tested with a wavelength-sweeping distributed feedback laser, photodetector and a H13C14N gas cell. To perceive temperature and pressure synchronously, a pair of π-FBGs are glued on the outer wall of the thin-walled cylinder along the circumferential direction with different angles. The interference of temperature is effectively corrected by a high-precision calibration algorithm. The reported sensor has a sensitivity of 4.42 pm/MPa, a resolution of 0.036% full scale (F.S.), and a repeatability error of 0.045% F.S. in the range of 0-110 MPa that corresponds to an ocean depth resolution of 5 m and a measurement range of eleven thousand meters to cover the deepest trench of the Ocean. The sensor features simplicity, good repeatability, and practicability.