We have developed a mathematical model describing the process of microbial enhanced oil recovery (MEOR). The one-dimensional isothermal model comprises displacement of oil by water containing bacteria and substrate for their feeding. The bacterial products are both bacteria and metabolites. In the context of MEOR modeling, a novel approach is partitioning of metabolites between the oil and the water phases. The partitioning is determined by a distribution coefficient. The transfer part of the metabolite to oil phase is equivalent to its "disappearance," so that the total effect from of metabolite in the water phase is reduced. The metabolite produced is surfactant reducing oil-water interfacial tension, which results in oil mobilization. The reduction of interfacial tension is implemented through relative permeability curve modifications primarily by lowering residual oil saturation. The characteristics for the water phase saturation profiles and the oil recovery curves are elucidated. However, the effect from the surfactant is not necessarily restricted to influence only interfacial tension, but it can also be an approach for changing, e.g., wettability. The distribution coefficient determines the time lag, until residual oil mobilization is initialized. It has also been found that the final recovery depends on the distance from the inlet before the surfactant effect takes place. The surfactant effect position is sensitive to changes in maximum growth rate, and injection concentrations of bacteria and substrate, thus determining the final recovery. Different methods for incorporating surfactant-induced reduction of interfacial tension into models are investigated. We have suggested one method, where several parameters can be estimated in order to obtain a better fit with experimental data. For all the methods, the incremental recovery is very similar, only coming from small differences in water phase saturation profiles. Overall, a significant incremental oil recovery can be achieved, when the sensitive parameters in the context of MEOR are carefully dealt with.

No abstract

North Sea tight chalk oil reservoirs are well-known for their submicron pore throat sizes and heterogeneous porosity pattern that includes fractures and microfractures. The host rock of these reservoirs is extremely sensitive and can easily react with the injected fluid, which in turn adversely affects the permeability and thus injectivity. The combined effect of these parameters makes oil production in chalk reservoirs extremely difficult. A novel solvent-based enhanced oil recovery (EOR) method that can address these issues is investigated for the first time in the chalk reservoirs. We thouroughly investigate the oil recovery potential and dominant oil recovery mechanisms by dimethyl ether (DME)−brine injection under conditions pertinent to the North Sea tight chalk oil reservoirs. A series of systematically designed high-pressure and high-temperature flooding experiments were carried out using reservoir core and crude oil. The experimental results revealed the strong oil recovery potential of tertiary DME−brine injection with two different DME contents. Furthermore, both secondary and tertiary DME−brine injection scenarios significantly improved the oil recovery with the better performance in the secondary scenario. The results show that the dominant oil recovery mechanism is rapid and strong oil swelling is caused by the preferential partitioning of DME into the oil phase. During DME−brine injection, no indications of rock mineral dissolution and adverse effects on rock permeability were observed. This is one of the advantages of this method over CO 2 , CO 2 −water alternating gas (WAG), and alkaline injections in which the EOR agent causes calcite dissolution, wormhole formation, and scaling issues in fragile chalk reservoirs.

No abstract

Microbial enhanced oil recovery (MEOR) utilizes microbes for enhancing the recovery by several mechanisms, among which the most studied are the following: (1) reduction of oil-water interfacial tension (IFT) by the produced biosurfactant and (2) selective plugging by microbes and metabolic products. One of the ways of bacterial survival and propagation under harsh reservoir conditions is formation of spores. A model has been developed that accounts for bacterial growth, substrate consumption, surfactant production, attachment/filtering out, sporulation, and reactivation. Application of spore-forming bacteria is an advantageous novelty of the present approach. The mathematical setup is a set of 1D transport equations involving reactions and attachment. Characteristic sigmoidal curves are used to describe sporulation and reactivation in response to substrate concentrations. The role of surfactant is modification of the relative permeabilities by decreasing the interfacial tension. Attachment of bacteria reduces the pore space available for flow, i.e., the effective porosity and permeability. Clogging of specific areas may occur. An extensive study of the MEOR on the basis of the developed model has resulted in the following conclusions. In order to obtain sufficient local concentrations of surfactant, substantial amounts of substrate should be supplied; however, massive growth of bacteria increases the risk for clogging at the well inlet areas, causing injectivity loss. In such areas, starvation may cause sporulation, reducing the risk of clogging. Substrate released during sporulation can be utilized by attached vegetative bacteria and they will continue growing and producing surfactant, which prolongs the effect of the injected substrate. The simulation scenarios show that application of the spore-forming bacteria gives a higher total production of surfactant and the reduced risk of clogging, leading to an increased period of production and a higher oil recovery.