<em>Jatropha curcas</em> seed oil can be used for numerous purposes including fuel, soap and cosmetics. Better quality oil is obtained by cold pressing, the effectiveness of which is unfortunately limited by a low extraction rate. The objective of this study was to optimize cold hydraulic extraction parameters of <em>Jatropha curcas</em> seed oil by increasing the oil recovery and characterising the extracted oil. The key extraction parameters (dwell time, pressure, compression speed, and press cage charge) were determined using a laboratory hydraulic press. The results show that the unhulled and dehulled seeds contained 5.1 and 2.9% moisture, as well as 33.6 and 51.7% fat, respectively. Under the optimal operating conditions and at ambient temperature (25 °C), the oil recovery from whole (crushed) material was 38.2 (42.5)% unhulled seeds and 71.3 (69.5)% dehulled seeds. The physicochemical characteristics of cold-extracted Jatropha oil were 10ppm phosphorus, 1.9 ppm iron, 0.0 ppm copper, 0.15% water-volatile matter, 0.918 (15 °C) density, and 37.72 cSt (37.8 °C) kinematic viscosity, respectively. In conclusion, the optimized cold hydraulic extraction of jatropha seed oil leads to high oil recovery and good oil quality suitable for industrial applications.

No abstract