A large number of post mortem human subjects was used to investigate the relation between the micro-structure of rib cortical bone and the mechanical properties using Fractal Dimension. Uniaxial tensile tests were performed on coupons of rib cortical bone. Tensile strength, yield stress, Young's Modulus, maximum strain, and work to fracture were determined for each cou-pon. Fractal dimension was computed using CT images and Digital Image Correlation proce-dures. A highly significant effect of fractal dimension in the mechanical properties was found. In addition, the variation in mechanical properties was found to be adequately represented by Generalized Extreme Value type distributions.

The mechanical properties of the cerebral bridging veins (CBVs) were studied using advanced microtensile equipment. Detailed high-quality curves were obtained at different strain rates, showing a clearly nonlinear stress–strain response. In addition, the tissue of the CBVs exhibits stress relaxation and a preconditioning effect under cyclic loading, unequivocal indications of viscoelastic behavior. Interestingly, most previous literature that conducts uniaxial tensile tests had not found significant viscoelastic effects in CBVs, but the use of more sensitive tests allowed to observe the viscoelastic effects. For that reason, a careful mathematical analysis is presented, clarifying why in uniaxial tests with moderate strain rates, it is difficult to observe any viscoelastic effect. The analysis provides a theoretical explanation as to why many recent studies that investigated mechanical properties did not find a significant viscoelastic effect, even though in other circumstances, the CBV tissue would clearly exhibit viscoelastic behavior. Finally, this study provides reference values for the usual mechanical properties, as well as calculations of constitutive parameters for nonlinear elastic and viscoelastic models that would allow more accurate numerical simulation of CBVs in Finite Element-based computational models in future works.

Many previous studies on the mechanical properties of Parasagittal Bridging Veins (PSBVs) found that strain rate had a significant effect on some mechanical properties, but did not extensively study the viscoelastic effects, which are difficult to detect with uniaxial simple tensile tests. In this study, relaxation tests and tests under cyclic loading were performed, and it was found that PSBVs do indeed exhibit clear viscoelastic effects. In addition, a complete viscoelastic model for the PSBVs is proposed and data from relaxation, cyclic load and load-unload tests for triangular loads are used to find reference values that characterize the viscoelastic behavior of the PSBVs. Although such models have been proposed for other types of blood vessels, this is the first study that clearly demonstrates the existence of viscoelastic effects from an experimental point of view and also proposes a specific model to explain the data obtained. Finally, this study provides reference values for the usual viscoelastic properties, which would allow more accurate numerical simulation of PSBVs by means of computational models.

No abstract

Objective. The mechanical properties of ribs from a large number of post-mortem human subjects (PMHS) were analyzed to search for variation according to age, sex or BMI in the sample. A large sample of specimens from different donors (N = 64) with a very wide range of ages and anthropometric characteristics was tested. Methods. Uniaxial tensile tests were used for a sample of coupons machined from cortical bone tissue in order to isolate the purely mechanical properties from the geometrically influenced properties of the rib. Each coupon is about 25 mm long and has a thickness of about 0.5 mm. The mechanical properties measured for each specimen/coupon include YM, yield stress, ultimate stress (maximum failure stress), ultimate strain, and resilience (energy to fracture of SED). The study provides new methodological improvements in DIC techniques. Results. This study is notable for using an atypically large sample of number of PMHS. The size of the sample allowed the authors to determine that age has a significant effect on failure stress (p < 0.0001), yield stress (p = 0.0047), ultimate strain (p < 0.0001) and resilience (p < 0.0001) [numbers in parentheses represent the corresponding p − values]. Finally, there is a combined effect, so that for a given age, an increase of BMI leads to a decrease of the maximum strain (i.e. cortical bone is less stiff when both age and BMI are higher).