<p>At least 20% of existing railway bridges in Sweden are reinforced concrete (RC) trough bridge that consist in a slab carried by two longitudinal main beams. As these bridges are getting old, there is an urging need to assess their remaining capacity with the aim of prolonging their service lives. The limited literature on the topic has pointed out that there is a significant difference between the capacity predicted by available codes and that obtained experimentally. In this paper, a review of the Bridge and Tunnel Management database (BaTMan) of railway infrastructure in Sweden, is carried out to gain an overview of the current state of the Swedish railway bridge, with focus on trough bridges. Then, a non-linear finite element model is calibrated using the experimental results of the previous testing of a decommissioned trough bridge. The model is used in a parametric study where the effect of key mechanical parameters on the capacity of trough bridges is studied.</p>

<p>In this paper, experiences on the development of an assessment method for existing bridges are presented. The method is calibrated using the results of full-scale testing to failure of a prestressed bridge in Sweden. To evaluate the key parameters for the structural response, measured by deflections, strains in tendons and stirrups and crack openings, a sensitivity study based on the concept of fractional factorial design is incorporated to the assessment. Results showed that the most significant parameters are related to the tensile properties of the concrete (tensile strength and fracture energy) and the boundary conditions. A finite element (FE) model in which the results of the sensitivity analysis were applied, was able to predict accurately the load-carrying capacity of the bridge and its failure mode. Two additional existing prestressed concrete bridges, that will be used to improve further the method, are also described, and discussed.</p>

No abstract