We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic deformations of the drop interface when crossing the stripes. Numerical simulations confirm this view and are used to elucidate the principles underlying the experimental observations.

We perform a joint numerical and experimental study to systematically characterize the motion of 30 μl drops of pure water and of ethanol in water solutions, sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with a large wettability contrast and a typical width of hundreds of microns. The fraction of the hydrophobic areas has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be described by a renormalized value of the critical Bond number, i.e., the critical dimensionless force needed to depin the drop before it starts to move. Close to the critical Bond number we observe a jerky motion characterized by an evident stick-slip dynamics. As a result, dissipation is strongly localized in time, and the mean velocity of the drops can easily decrease by an order of magnitude compared to the sliding on the homogeneous surface. Lattice Boltzmann numerical simulations are crucial for disclosing to what extent the sliding dynamics can be deduced from the computed balance of capillary, viscous, and body forces by varying the Bond number, the surface composition, and the liquid viscosity. Beyond the critical Bond number, we characterize both experimentally and numerically the dissipation inside the droplet by studying the relation between the average velocity and the applied volume forces.

We report the results of extensive experimental studies of the sliding of water drops on chemically heterogeneous surfaces formed by square and triangular hydrophobic domains printed on glass surfaces and arranged in various symmetric patterns. Overall, the critical Bond number, that is, the critical dimensionless force needed to depin the drop, is found to be strongly affected by the shape and the spatial arrangement of the domains. Soon after the droplet begins to move, stick-slip motion is observed on all surfaces, although it is less pronounced than that on striped surfaces. On the triangular patterns, anisotropic behavior is found with drops sliding down faster when the tips of the glass hydrophilic triangles are pointing in the down-plane direction. Away from the critical Bond number, the dynamic regime depends mainly on the static contact angle and weakly on the actual surface pattern. Lattice Boltzmann numerical simulations are performed to validate the experimental results and test the importance of the viscous ratio between the droplet phase and the outer phase.