Dextran biotemplating offers a novel, sustainable and fast reduced-temperature synthetic route for energy storage materials (e.g. P3-Na2/3Ni1/3Mn2/3O2) with fine control over particle size and morphology that offers a new route to optimizing electrochemical properties.

No abstract

High-entropy alloys (HEAs), i.e., multicomponent alloys where (typically five or more) elements are combined in equal, or roughly equal, quantities, are of great current interest, due to their formation of single, simple structured phases, and the unusual properties they can potentially exhibit. Phase presence may be predicted using semi-empirical methods, but deviations from predictions may be seen during the course of alloy synthesis, with the formation of unexpected phases. The generation of such phases may be controlled with knowledge of the effective solidification temperature; in this full article, Chvorinov’s rule for solidification time is used to estimate this temperature as part of the design of a new multiphase alloy system, TiVCrZr-Six. Further heat treatment of the TiVCrZr-Si system confirms the applicability of this approach. The new compositions demonstrate mechanical properties that suggest potential for optimization for high-temperature applications.

P3-Na2/3Ni1/3Mn2/3O2 (P3-NNM) is a promising cathode material for Na-ion batteries, although large volume expansions during cycling mean that challenges around suitable binders still remain. This study reports the use of xanthan gum as a water-soluble, easy to handle, and sustainable biopolymer binder in conjunction with a P3-Na2/3Ni1/3Mn2/3O2-positive electrode material. The conditions for recovering pristine P3-NNM powders, following water-based processing, are established, and the electrochemical performance of cells prepared using the xanthan gum binder are compared to the more traditional polyvinylidene fluoride. Comparable discharge capacities are observed regardless of the binder choice, at ca. 115 mA h g−1 (77 mAh g−1 after 50 cycles; 0.1 C between 2.0 and 4.2 V). The xanthan gum binder cells also show a similar rate capability and slightly higher capacities at faster c-rates vs. polyvinylidene fluoride, making xanthan gum a viable alternative to the traditional organic binders for water-stable cathode materials.