Demographic changes and increasing air pollution entail that monitoring of respiratory parameters is in the focus of research. In this study, two customary inertial measurement units (IMUs) are used to measure the breathing rate by using quaternions. One IMU was located ventral, and one was located dorsal on the thorax with a belt. The relative angle between the quaternion of each IMU was calculated and compared to the respiratory frequency obtained by a spirometer, which was used as a reference. A frequency analysis of both signals showed that the obtained respiratory rates vary slightly (less than 0.2/min) between the two systems. The introduced belt can analyse the respiratory rate and can be used for surveillance tasks in clinical settings.

Demographic changes, increasing air pollution and the ongoing Covid-19 pandemic, causing virus-induced respiratory failures, monitoring of respiratory parameters is the focus of international interest. In this study, motioncapture- system data was used to get circumferences of the human thorax while executing different breathing patterns. Four geometric models were used to model tidal volumes of the tracked person while using spirometry data as a reference. The results show that all four introduced models can be used for tidal volume calculation based on changes in the thoracic circumference. In terms of accuracy, the use-case must be considered