No abstract

No abstract

Before using low-quality wood chips for gasification on the small and medium scale (30-500 kW el), mechanical fuel pretreatment has to be employed to ensure the required fuel characteristics concerning particle size distribution and moisture. Two different low-quality wood assortments (calamity wood and roadside maintenance wood) were subjected to three different mechanical fuel pretreatment strategies and a detailed analysis was realized along the supply chains. The results reveal the enrichment in elements characteristic of soil contamination in the removed fine fraction. Gasification tests were successfully performed with the upgraded low-quality fuels in field trials and indicated comparable electrical efficiencies but higher supervision effort during plant operation.

No abstract

Technical drying of harvested wood fuels is heat and energy consuming, while natural pre-drying in the forest, e.g., in stacks or storage piles, is accompanied by energy losses through natural degradation processes. Dewatering of energy wood by mechanical pressing is an innovative method to reduce the moisture content prior to thermal drying while producing press waters (PW, also referred to as wood juice) as a by-product. To date, the characteristics and utilization potentials of PW are largely unknown. In this study, three different spruce- and poplar-based PW were analyzed for their characteristics such as dry matter (DM), organic dry matter (oDM) concentration, pH-value, element concentration or chemical compounds. Additionally, they were used for anaerobic digestion (AD) experiments with digested sewage sludge (DSS) serving as inoculum. The fresh matter-based DM concentrations of the PW were between 0.4 and 3.2%, while oDM concentrations were between 87 and 89%DM. The spruce-based PW were characterized by lower pH-values of approx. 4.4, while the poplar-based PW was measured at pH 8. In the AD experiments, DSS alone (blank variant) achieved a specific methane yield of 95 ± 26 mL/goDM, while the mixture of spruce-based PW and DSS achieved up to 160 ± 12 mL/goDM, respectively. With further research, PW from wood fuel preparation offer the potential to be a suitable co-substrate or supplement for AD processes.