Semiconductor nanowires (NWs) represent a new class of materials and a shift from conventional two-dimensional bulk thin films to three-dimensional devices. Unlike thin film technology, lattice mismatch strain in NWs can be relaxed elastically at the NW free surface without dislocations. This capability can be used to grow unique heterostructures and to grow III-V NWs directly on inexpensive substrates, such as Si, rather than lattice-matched but more expensive III-V substrates. This capability, along with other unique properties (quantum confinement and light trapping), makes NWs of great interest for next generation optoelectronic devices with improved performance, new functionalities, and reduced cost. One of the many applications of NWs includes energy conversion. This review will outline applications of NWs in photovoltaics, thermoelectrics, and betavoltaics (direct conversion of solar, thermal, and nuclear energy, respectively, into electrical energy) with an emphasis on III-V materials. By transitioning away from bulk semiconductor thin films or wafers, high efficiency photovoltaic cells comprised of III-V NWs grown on Si would improve performance and take advantage of cheaper materials, larger wafer sizes, and improved economies of scale associated with the mature Si industry. The thermoelectric effect enables a conversion of heat into electrical power via the Seebeck effect. NWs present an opportunity to increase the figure of merit (ZT) of thermoelectric devices by decreasing the thermal conductivity (κ) due to surface phonon backscattering from the NW surface boundaries. Quantum confinement in sufficiently thin NWs can also increase the Seebeck coefficient by modification of the electronic density of states. Prospects for III-V NWs in thermoelectric devices, including solar thermoelectric generators, are discussed. Finally, betavoltaics refers to the direct generation of electrical power in a semiconductor from a radioactive source. This betavoltaic process is similar to photovoltaics in which photon energy is converted to electrical energy. In betavoltaics, however, energetic electrons (beta particles) are used instead of photons to create electron-hole pairs in the semiconductor by impact ionization. NWs offer the opportunity for improved beta capture efficiency by almost completely surrounding the radioisotope with semiconductor material. Improving the efficiency is important in betavoltaic design because of the high cost of materials and manufacturing, regulatory restrictions on the amount of radioactive material used, and the enabling of new applications with higher power requirements.

We report the structural, optical and electrical properties of GaAs quantum dots (QDs) embedded along GaP nanowires. The GaP nanowires contained p-i-n junctions with 15 consecutively grown GaAs QDs within the intrinsic region. The nanowires were grown by molecular beam epitaxy using the self-assisted vapor-liquid-solid process. The crystal structure of the NWs alternated between twinned ZB and WZ as the composition along the NW alternated between the GaP barriers and the GaAs QDs, respectively, leading to a polytypic structure with a periodic modulation of the NW sidewall facets. Photodetector devices containing QDs showed absorption beyond the bandgap of GaP in comparison to nanowires without QDs. Voltage-dependent measurements suggested a field emission process of carriers from the QDs.

A betavoltaic device is reported that directly converts beta energy from a 63Ni radioisotope into electrical energy by impact ionization in a GaP nanowire array. The GaP nanowires are grown in a periodic array by molecular beam epitaxy on silicon using the self-assisted vapor–liquid–solid method. By growing GaP nanowires with large packing fraction and length on the order of the maximum beta range, the nanowires can efficiently capture the betas with high energy conversion efficiency while using inexpensive Si substrates. Monte Carlo simulations predict a betavoltaic efficiency in agreement with experimental results. The nanowire betavoltaic device can be used as a power source for nano-/micro-systems such as mobile electronic devices, implantable medical devices, and wireless sensor networks.