No abstract

By applying a variety of strategies, including both the development of new drive concepts as well as the use of lightweight constructions, it is intended to meet the climate targets set by the Paris Agreement. Multi-material design is often used when applying lightweight constructions, especially in the mobility sector. Herby, various materials with different properties are combined to well adapt the structure to the application of force in order to reduce weight. For example, this can result in the combined use of (high-strength) steel and aluminium. However, the increasing number of materials used and the number of resulting joints has led to the development of a number of different joining processes. These can only be used to a limited extent for joining multi-material joints and are usually inflexible facing changing boundary conditions. Examples of further difficulties affecting the established processes are metallurgical incompatibilities, which particularly pose difficulties for the use of thermal joining processes. A frequently used mechanical joining process is self-piercing riveting. Due to its high load-bearing capacities, a wide range of application and high process robustness it is often used when joining of dissimilar material is required. However, in case of self-piercing riveting used, the increasing number of multi-material joints and material-thickness combinations leads to the need of a large number of rivet-die-combinations to adapt the joining process to the respective joining task. Since the joining system cannot react to these changes, a tool change or an adjustment of the system is necessary, which leads to a reduction in efficiency and extended process times. To increase flexibility and process efficiency, new, versatile joining technologies are needed that can be adapted to changing boundary conditions. One possibility for this is the use of multi-range capable semi-tubular self-piercing rivets, which are inserted into the joint by using a new joining system with extended punch-sided actuator technology. The increased actuator technology enables the rivet to be set by an inner punch and subsequently to form a rivet head by embossing with an outer punch. All punch movements can be controlled independently of each other, enabling adaptive adjustment of the process parameters. Depending on the rivet geometry used, rivet head formation by the outer punch can be performed both with and without head deformation. The rivet without head deformation consists of a tubular shape with ring grooves in the rivet head area. Using the outer punch, punch-sided material is formed into the ring grooves creating an interlock in the head area of the rivet. The rivet with head deformation is designed differently. It is modified to enable subsequent forming to the respective thickness of the joint by forming the protrusion of the rivet head onto the punch-sided joining part. In the study presented here, the joining process of the versatile self-piercing riveting is presented, analysed and the property profile of the joints is determined on the basis of various material-thickness combinations. Here, both the characteristic parameters of the joints and the joint load-bearing capacities are determined. Finally the property profiles are compared with conventionally manufactured joints in order to identify potential for improvement.

The increasing economic and ecological demands on the mobility sector require efforts to reduce resource consumption in both the production and utilization phases. The use of lightweight construction technologies can save material and increase energy efficiency during operation. Multi-material systems consisting of different materials and geometries are used to achieve weight reduction. Since conventional joining processes reach their limits in the connection of these components, new methods and technologies are necessary in order to be able to react versatilely to varying process and disturbance variables. For fundamental investigations of new possibilities in joining technology, numerical investigations are helpful to identify process parameters. To generate valid results, robust and efficient material models are developed which are adapted to the requirements of versatile joining technologies, for instance to the high plastic strains associated with self-piercing riveting. To describe the inherent strain-induced plastic orthotropy of sheet metal an anisotropic Hill-plasticity model is formulated. Tensile tests for different sheet orientations are conducted both experimentally and numerically to adjust the anisotropic material parameters by inverse parameter identification for aluminium EN AW-6014 and steel HCT590X. Then, the layer compression test is used to validate the model and the previously identified parameters.

An increasingly connected production in the sense of Industry 4.0 allows completely new possibilities in regard to improved and more efficient production and higher product quality. But a key factor to Industry 4.0 is a consistent data flow along the production chain. However, the exchange of data, especially between companies, still is a major obstacle to overcome in order to achieve the aforementioned advantages. Currently, there are increasing efforts to record and analyse data. But there is a lack of a holistic system to handle data, therefore commonly company databases or other inefficient methods are used. These solutions are limited with regard to data exchange since the ownership of data cannot be proven, production data has no unforgeable timestamp, which in turn hinders the generation of complete production history from the final product (e.g., car door) back to the semi-finished product (e.g., steel sheet). As a result, there is insufficient to no data exchange along the production chain. In order to solve these problems blockchain is a promising approach. At the Institute of Manufacturing Technology, an operational blockchain system was developed and implemented using standard production machines. With the combination of a quarto rolling mill and a 400t - press, representing the sheet metal supplier and a forming company, respectively, the typical process chain of sheet metal processing is represented, which allows the detailed investigation of the established blockchain in this field of application. Within this contribution, the conceptual approach of a blockchain system for forming technology will be presented. The nature and the classification of occurring data throughout the production chain will be addressed.