Due to greenhouse gas emissions, the production of cement clinker is considered unsustainable and many attempts are being made to replace cement with alternative materials sourced from agriculture, industry and other urban practices, such as construction and demolition works. The aim of this paper is to analyze the effects of cement substitution by locally available waste materials in Serbia, such as fly ash (FA), blast furnace granulated slag (BFGS) and wheat straw ash (WSA), up to the 50% replacement volume rate in cement–lime mortars. As the effective application of supplementary cementitious materials (SCMs) in cement-based materials requires a comprehensive insight into their properties, a characterization of materials involving all relevant physical, chemical and mechanical tests is conducted. Ten different mortar mixed with ingredients of a volume ratio 1:2:4 (cementitious powder/lime/sand) were designed and their consistency, bulk density, capillary water absorption, flexural strength, compressive strength and thermal analysis (TGA/DTA) results were examined to determine the influence of the abovementioned SCMs on mortar properties. Research findings highlight the possibility of replacing cement with slag (50%), fly ash (30%) or wheat straw ash (30%) while maintaining its performance and improving the economic and environmental impacts of masonry mortar production.

No abstract

As the cement industry is responsible for 7% of the global CO2 emissions, locally and abundantly available materials are vastly valorized, and their use is assuming a significant role in this domain. Over the last few decades, significant research in the development of supplementary cementitious materials (SCMs) derived from industrial wastes, such as fly ash (FA), has been conducted. However, facing environmental pressures, coal power plants are closing across the planet. Hence there is an urgent need to identify sustainable SCMs that can replace FA in the concrete industry. Furthermore, the usage of FA in cement-based composites does not often produce satisfactory results from the aspect of certain properties, such as freeze–thaw durability. Therefore, the application of natural zeolites (NZs) for these purposes has emerged as an area of interest in the civil engineering practice. This paper presents the results of experimental research regarding the influence of NZ, as a mineral admixture, on the basic physical and mechanical properties of cement mortars, with a focus on frost resistance and drying shrinkage. The amount of NZ was varied from 10 to 30% in relation to cement mass. The findings indicate that NZ positively influences the drying shrinkage reduction regardless of the replacement level, while the best results concerning frost resistance can be achieved in cement blends with 10% NZ.

A sustainable use of locally available wastes from agriculture as supplementary cementitious materials (SCMs) is an alternative solution for the prevention of excessive raw material usage, reduction of CO2 emission and cost-effective concrete production. This paper studies the reactivity of non-traditional waste SCMs: Wheat straw ash (WSA), mixture of wheat and soybean straw ash (WSSA) and soybean straw ash (SSA), which are abundant as agricultural by-products in Serbia. The chemical evaluation using XRF technique, thermal analysis (TGA/DSC), XRD and FTIR methods were performed along with physical properties tests to investigate the feasibility of utilizing biomass ashes as cement substitutes. The obtained results demonstrate a high pozzolanic activity of WSA, which is attributed to a high reactive silica content of the ash and its satisfactory level of fineness. A wider hump in XRD pattern of WSA compared to WSSA and SSA confirmed that it abounds in amorphous (reactive) phase. The insufficient activity index of soybean-based biomass ashes, characterized with a low silica content, was improved by additional grinding and/or blending with amorphous silica-rich material. This points out the mechanical activation, i.e., grinding procedure, and chemical activation, i.e., modification of the chemical composition, as techniques efficient at producing pozzolanic materials from biomass wastes. Tested biomass ashes are characterized with negligible leaching values of heavy metals, thereby satisfying eco-friendly principles of SCM utilization. The application of biomass ashes as SCMs leads to substantial cost savings, as well as benefits to the environment, such as lower consumption of cement, reduction of CO2 emissions during the production of cement and sustainable waste management.

Influence of fly ash and decreasing water-powder ratio on performance of recycled aggregate concrete Investigation results of the combined effect of partial cement replacement with fly ash, and the use of recycled concrete aggregate to improve the sustainability of concrete, are presented in this paper. The compressive strength, capillary water absorption, water permeability, and chloride ion penetration, are analysed by testing nine concrete mixtures, in which the fly ash content and water to powder ratio were varied. The results show that compressive strength slightly decreases as the fly ash content increases, but that this can be compensated by reducing the water to powder ratio. Utjecaj letećeg pepela i smanjenja vodovezivnog omjera na svojstva betona s recikliranim agregatom U radu su prikazani rezultati ispitivanja zajedničkog učinka djelomične zamjene cementa s letećim pepelom i upotrebe recikliranog agregata s ciljem poboljšanja održivosti betona. Ispitivano je devet betonskih mješavina, u kojima su varirani količina letećeg pepela i vodovezivni omjer, analizirani su: tlačna čvrstoća, kapilarno upijanje, vodopropusnost i otpornost na prodor klorida. Dobiveno je da se povećanjem količine letećeg pepela neznatno smanjuje tlačna čvrstoća, ali da se smanjenjem vodovezivnog omjera to može nadomjestiti.