We report herein the micropatterning of poly(3,4-ethylenedioxythiophene) (PEDOT) on a hydrogel, agarose, to provide a fully organic, moist, and flexible electrode. The PEDOT/agarose electrodes were prepared through two electrochemical processes: electropolymerization of PEDOT into the hydrogel and electrochemical-actuation-assisted peeling. We also present a typical application of the PEDOT/agarose electrode to the cultivation of contractile myotubes.

We have developed gel sheet-supported C(2)C(12) myotube micropatterns and combined them with a microelectrode array chip to afford a skeletal muscle cell-based bioassay system. Myotube line patterns cultured on a glass substrate were transferred with 100% efficiency to the surface of fibrin gel sheets. The contractile behavior of each myotube line pattern on the gel was individually controlled by localized electrical stimulation using microelectrode arrays that had been previously modified with electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT). We successfully demonstrated fluorescent imaging of the contraction-induced translocation of the glucose transporter, GLUT4, from intracellular vesicles to the plasma membrane of the myotubes. This device is applicable for the bioassay of contraction-induced metabolic alterations in a skeletal muscle cell.

Here, we describe a method for producing patterned cell adhesion inside silicone tubing. A platinum (Pt) needle microelectrode was inserted through the wall of the tubing and an oxidizing agent electrochemically generated at the inserted electrode. This agent caused local detachment of the anti-biofouling heparin layer from the inner surface of the tubing. The cell-adhesive protein fibronectin selectively adsorbed onto the newly exposed surface, making it possible to initiate a localized cell culture. The electrode could be readily set in place without breaking the tubular structure and, importantly, almost no culture solution leaked from the electrode insertion site after the electrode was removed. Ionic adsorption of poly-L-lysine at the tubular region retaining a heparin coating was used to switch the heparin surface from cell-repellent to cell-adhesive, thereby facilitating the adhesion of a second cell type. The combination of the electrode-based technique with layer-by-layer deposition enabled the formation of patterned co-cultures within the semi-closed tubular structure. The utility of this approach was demonstrated by patterning co-cultures of hepatocytes or endothelial cells with fibroblasts. The controlled co-cultures inside the elastic tubing should be of value for cell-cell interaction studies following application of chemical or mechanical stimuli and for tissue engineering-based bioreactors.

An ordinary atomic force microscopy (AFM) was functionalized and applied to electrochemically draw micropatterns of biomolecules. To fabricate an electrochemical AFM probe having an electrode at the tip, a metal-coated AFM probe was first insulated with Parylene C, and then the apex of the tip was ground mechanically to expose the electrode. The effective electrode diameter was estimated to be ca. 500 nm. The electrode probe was positioned close to a heparin-coated antibiofouling substrate and used to locally generate hypobromous acid from a dilute Br(-) solution to render the substrate surface protein-adhesive. In situ topographical imaging after the electrochemical treatment suggested the heparin layer became detached to allow the adsorption of proteins, in this case fibronectin. The diameter of the drawn fibronectin pattern was 2 microm, which is one order of magnitude smaller than we achieved previously using a microdisk electrode (tip diameter 10 microm).

No abstract