Herein, we investigate the morphology, structure and piezoelectric performances of neat polyvinylidene fluoride hexafluoropropylene (PVDF-HFP) and PVDF-HFP/Co-ZnO nanofibers, fabricated by electrospinning. An increase in the amount of crystalline β-phase of PVDF-HFP has been observed with the increase in Co-doped ZnO nanofiller concentration in the PVDF-HFP matrix. The dielectric constants of the neat PVDF-HFP and PVDF-HFP/2 wt.% Co-ZnO nanofibers are derived as 8 and 38 respectively. The flexible nanogenerator manipulated from the polymer nanocomposite (PVDF-HFP/Co-ZnO) exhibits an output voltage as high as 2.8 V compared with the neat PVDF-HFP sample (~120 mV). These results indicate that the investigated nanocomposite is appropriate for fabricating various flexible and wearable self-powered electrical devices and systems.

Thermoplastic matrix polymer composites have gained commercial success in the semistructural and structural applications. Polyethylene (PE) is one of the most versatile and widely used thermoplastics in the world because of its excellent properties like toughness, near-zero moisture absorption, excellent chemical inertness, low coefficient of friction, ease of processing and unusual electrical properties. This review is designed for comprehensive source of PE-based polymer composites research, including structure and classification of PE manufacturing/processing techniques for PE composites, and it also described different characterization methods for PE composites. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) characterization methods were used to describe the thermal properties of PE composites. Morphological studies were explained by using scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) techniques. Rheological properties and dynamic mechanical analysis (DMA) are also discussed in this review. X-ray diffraction (XRD) characterization was described in this review to explain crystallinity in PE composites. Hence, this review offers a comprehensive discussion on processing and characterization of PE-based composites.

Composites of Linear Low Density Polyethylene (LLDPE) and Graphene Nanoplatelets (GNPs) were processed using a twin screw extruder under different extrusion conditions. The effects of screw speed, feeder speed and GNP content on the electrical, thermal and mechanical properties of composites were investigated. The inclusion of GNPs in the matrix improved the thermal stability and conductivity by 2.7% and 43%, respectively. The electrical conductivity improved from 10 -11 to 10 -5 S/m at 150 rpm due to the high thermal stability of the GNPs and the formation of phonon and charge carrier networks in the polymer matrix. Higher extruder speeds result in a better distribution of the GNPs in the matrix and a significant increase in thermal stability and thermal conductivity. However, this effect is not significant for the electrical conductivity and tensile strength. The addition of GNPs increased the viscosity of the polymer, which will lead to higher processing power requirements. Increasing the extruder speed led to a reduction in viscosity, which is due to thermal degradation and/or chain scission. Thus, while high speeds result in better dispersions, the speed needs to be optimized to prevent detrimental impacts on the properties.

No abstract

No abstract