Abstract-Millimeter wave (mmWave) communication is expected to be widely deployed in fifth generation (5G) wireless networks due to the substantial bandwidth available at mmWave frequencies. To overcome the higher path loss observed at mmWave bands, most prior work focused on the design of directional beamforming using analog and/or hybrid beamforming techniques in largescale multiple-input multiple-output (MIMO) systems. Obtaining potential gains from highly directional beamforming in practical systems hinges on sufficient levels of channel estimation accuracy, where the problem of channel estimation becomes more challenging due to the substantial training overhead needed to sound all directions using a high-resolution narrow beam. In this work, we consider the design of multi-resolution beamforming sequences to enable the system to quickly search out the dominant channel direction for single-path channels. The resulting design generates a multilevel beamforming sequence that strikes a balance between minimizing the training overhead and maximizing beamforming gain, where a subset of multilevel beamforming vectors is chosen adaptively to provide an improved average data rate within a constrained time. We propose an efficient method to design a hierarchical multiresolution codebook utilizing a Butler matrix, a generalized discrete Fourier transform (DFT) matrix implemented using analog RF circuitry. Numerical results show the effectiveness of the proposed algorithm.

In this paper, the problem of pilot beam pattern design for channel estimation in massive multiple-input multiple-output systems with a large number of transmit antennas at the base station is considered, and a new algorithm for pilot beam pattern design for optimal channel estimation is proposed under the assumption that the channel is a stationary Gauss-Markov random process. The proposed algorithm designs the pilot beam pattern sequentially by exploiting the properties of Kalman filtering and the associated prediction error covariance matrices and also the channel statistics such as spatial and temporal channel correlation. The resulting design generates a sequentially-optimal sequence of pilot beam patterns with low complexity for a given set of system parameters. Numerical results show the effectiveness of the proposed algorithm.Comment: 15 pages, 12 figures, Practical issues such as channel covariance matrix estimation are considere

The use of large-scale antenna systems in future commercial wireless communications is an emerging technology that uses an excess of transmit antennas to realize high spectral efficiency. Achieving potential gains with large-scale antenna arrays in practice hinges on sufficient channel estimation accuracy. Much prior work focuses on TDD based networks, relying on reciprocity between the uplink and downlink channels. However, most currently deployed commercial wireless systems are FDD based, making it difficult to exploit channel reciprocity. In massive MIMO FDD systems, the problem of channel estimation becomes even more challenging due to the attendant substantial training resources and feedback requirements which scale with the number of antennas. In this paper, we consider the problem of training sequence design that employs a set of training signals and its mapping to the training periods. We focus on reduced-dimension training sequence designs, along with transmit precoder designs, aimed at reducing both hardware complexity and power consumption. The resulting designs are extended to hybrid analog-digital beamforming systems, which employ a limited number of active RF chains for transmit precoding, by applying the Toeplitz distribution theorem to largescale linear antenna systems. A practical guideline for training sequence parameter selection is presented along with performance analysis. Index Terms-Massive MIMO systems, channel estimation, training sequence design, hybrid beamforming

No abstract

In this paper, channel estimation for massive multiple-input multiple-output (MIMO) systems with a large number of transmit antennas at the base station is considered, and a new algorithm for pilot beam pattern design for optimal channel estimation under the assumption of Gauss-Markov channel processes is proposed. The proposed algorithm designs the optimal pilot beam pattern sequentially by exploiting the statistics of the channel, antenna correlation, and temporal correlation. The algorithm provides a sequentially optimal sequence of pilot beam patterns for a given set of system parameters. Numerical results show the effectiveness of the proposed algorithm.