The lightweight titanium alloys possess good resistance to corrosion and temperature. They are used in turbine engines and aircraft structures. The strength of weld joint is dependent on thermal history in the weld zone and the weld bead geometry. The quality of weld can be improved by specifying the optimal welding parameters. Trial-and-error experimental methods are time-consuming and expensive. This paper deals with Computational Fluid Dynamics (CFD) models to carry out three-dimensional thermo-fluid analysis. Buoyancy and Marnangoni stress are incorporated. Temperature dependent properties of Ti-6Al-4V alloy and the process conditions are specified for generating the weld bead profile. The CFD model is validated initially through comparison of existing test data. Further studies are made by conducting tests on the pulsating laser welding of Ti-6Al-4V alloy. The effects of welding speed, pulse width and pulse frequency on the weld bead geometry are examined. This study confirms the adequacy of modeling and simulations of weld bead geometry with test results.

No abstract

<abstract> <p>Day by day laser welding (LW) is gaining industrial importance. Good quality of weld joints can be realized through this process. Because this process yields low distortion and small weld bead. Aerospace, nuclear, automotive, and biomedical industries are opting for the lightweight and corrosion resistance titanium alloys. This paper deals with the generation of optimal weld bead profiles in the conduction mode laser beam welding (LBW) of thin Ti–6Al–4V alloy sheets. Laser beam diameter, power and welding speed are the 3 LBW parameters, whereas, bead width, depth of penetration, heat affected zone and maximum temperature are the performance indicators (PIs). 3 levels are set for each LBW parameter. Taguchi's L₉ OA (orthogonal array) is selected to minimize the numerical simulations. ANSYS Fluent V16.0 with Vc++ code is used to develop a generic model. %Contribution of each process variable on the PIs is assessed performing ANOVA analysis. The range of PIs is assessed adopting the modified Taguchi approach. A set of optimal LBW parameters are identified considering a multi-objective optimization technique. For these optimal LBW parameters weld bead width is minimum, and the depth of penetration is maximum. Empirical relations for PIs are developed and validated with simulations. Utilizing the Taguchi's design of experiments, empirical relations are developed for the performance indicators in laser beam welding (LBW) simulations performing few trial runs and identified the optimal LBW process parameters.</p> </abstract>