Magnetic field sensors that exploit quantum effects have shown that they can outperform classical sensors in terms of sensitivity enabling a range of novel applications in future, such as a brain machine interface. Negatively charged nitrogen-vacancy (NV) centers in diamond have emerged as a promising high sensitivity platform for measuring magnetic fields at room temperature. Transferring this technology from laboratory setups into products and applications, the total size of the sensor, the overall power consumption, and the costs need to be reduced and optimized. Here, a fiber-based NV magnetometer featuring a complete integration of all functional components is demonstrated without using any bulky laboratory equipment. This integrated prototype allows portable measurement of magnetic fields with a sensitivity of 344 pT Hz −1/2 .

No abstract

The simulation of spectral stabilization of broad-area edge-emitting semiconductor diode lasers is presented in this paper. In the reported model light-, temperature- and charge carrier-distributions are solved iteratively in frequency domain for transverse slices along the semiconductor heterostructure using wide-angle finite-difference beam propagation. Depending on the operating current the laser characteristics are evaluated numerically, including near- and far-field patterns of the astigmatic laser beam, optical output power and the emission spectra, with central wavelength and spectral width. The focus of the model lies on the prediction of influences on the spectrum and power characteristics by frequency selective feedback from external optical resonators. Results for the free running and the spectrally stabilized diode are presented.

Broad area lasers with narrow spectra are required for many pumping applications and for wavelength beam combination. Although monolithically stabilized lasers show high performance, some applications can only be addressed with external frequency stabilization, for example when very narrow spectra are required. When conventional diode lasers with vertical far field angle, Θ V 95% ~ 45° (95% power) are stabilized using volume holographic gratings (VHGs), optical losses are introduced, limiting both efficiency and reliable output power, with the presence of any bar smile compounding the challenge. Diode lasers with designs optimized for extremely low vertical divergence (ELOD lasers) directly address these challenges. The vertical far field angle in conventional laser designs is limited by the waveguiding of the active region itself. In ELOD designs, quantum barriers are used that have low refractive index, enabling the influence of the active region to be suppressed, leading to narrow far field operation from thin vertical structures, for minimal electrical resistance and maximum power conversion efficiency. We review the design process, and show that 975 nm diode lasers with 90 µm stripes that use ELOD designs operate with Θ V 95% = 26° and reach 58% power conversion efficiency at a CW output power of 10 W. We demonstrate directly that VHG stabilized ELOD lasers have significantly lower loss and larger operation windows than conventional lasers in the collimated feedback regimes, even in the presence of significant (≥ 1 µm) bar smile. We also discuss the potential influence of ELOD designs on reliable output power and options for further performance improvement.

Spaceborne lidar (light detection and ranging) systems have a large potential to become powerful instruments in the field of atmospheric research. Obviously, they have to be in operation for about three years without any maintenance like readjusting. Furthermore, they have to withstand strong temperature cycles typically in the range of -30 to +50 °C as well as mechanical shocks and vibrations, especially during launch. Additionally, the avoidance of any organic material inside the laser box is required, particularly in UV lasers. For atmospheric research pulses of about several 10 mJ at repetition rates of several 10 Hz are required in many cases. Those parameters are typically addressed by DPSSL that comprise components like: laser crystals, nonlinear crystals in pockels cells, faraday isolators and frequency converters, passive fibers, diode lasers and of course a lot of mirrors and lenses. In particular, some components have strong requirements regarding their tilt stability that is often in the 10 μrad range. In most of the cases components and packages that are used for industrial lasers do not fulfil all those requirements. Thus, the packaging of all these key components has been developed to meet those specifications only making use of metal and ceramics beside the optical component itself. All joints between the optical component and the laser baseplate are soldered or screwed. No clamps or adhesives are used. Most of the critical properties like tilting after temperature cycling have been proven in several tests. Currently, these components are used to build up first prototypes for spaceborne systems