The performance of organic solar cells is determined by the delicate, meticulously optimized bulk-heterojunction microstructure, which consists of finely mixed and relatively separated donor/acceptor regions. Here we demonstrate an abnormal strong burn-in degradation in highly efficient polymer solar cells caused by spinodal demixing of the donor and acceptor phases, which dramatically reduces charge generation and can be attributed to the inherently low miscibility of both materials. Even though the microstructure can be kinetically tuned for achieving high-performance, the inherently low miscibility of donor and acceptor leads to spontaneous phase separation in the solid state, even at room temperature and in the dark. A theoretical calculation of the molecular parameters and construction of the spinodal phase diagrams highlight molecular incompatibilities between the donor and acceptor as a dominant mechanism for burn-in degradation, which is to date the major short-time loss reducing the performance and stability of organic solar cells.

No abstract

In this work, we report efficient semitransparent perovskite solar cells using solution-processed silver nanowires (AgNWs) as top electrodes. A thin layer of zinc oxide nanoparticles is introduced beneath the AgNWs, which fulfills two essential functionalities: it ensures ohmic contact between the PC 60 BM and the AgNWs and it serves as a physical foundation that enables the solution-deposition of AgNWs without causing damage to the underlying perovskite. The as-fabricated semitransparent perovskite cells show a high fill factor of 66.8%, V oc = 0.964 V, J sc = 13.18 mA cm −2 , yielding an overall efficiency of 8.49% which corresponds to 80% of the reference devices with reflective opaque electrodes.Inorganic-organic halide perovskite solar cells have recently emerged as a promising photovoltaic technology due to their high efficiencies and low-cost processing potential. [1][2][3][4] The exceptional optoelectronic properties of the perovskite crystals such as high carrier mobility and long charge diffusion length promise highly efficient charge separation. 5,6 These intriguing characteristics make perovskites ideal materials for photovoltaic applications. Since the first device demonstration in 2009, power conversion efficiency (PCE) of perovskite solar cells processed by both vacuum-deposition and solutionprocessing has surged to over 15%. 2,4,[7][8][9] The continuous and fast progress in the research related to perovskite solar devices has established them as a serious contestant to the traditional silicon-based panels.Together with the considerable efforts devoted to pursuing high efficiencies via improved crystallization of perovskite and searching for low-cost interface materials, 4,10-13 aesthetic semitransparent perovskite solar cells have been simultaneously receiving growing attention because of their specific application in transparent architectures, 14-17 such as windows, rooftops, greenhouses and other fashion elements. To achieve efficient semitransparent perovskite devices, both the anode and the cathode of the devices should be highly transparent and conductive in order to minimize the optical and resistance losses. To date, several studies have reported semitransparent perovskite solar cells, but most of these devices employed thin metal films (Al, Ag, Au) as top electrodes which were fabricated based on energy-intensive evaporation processes. [15][16][17] It is well known that, in addition to low-cost materials, the cost reduction of photovoltaic devices substantially depends on the ability to use high-throughput coating techniques in combination with roll-to-roll processing. 18 Despite its importance, however, less attention has been paid to the exploration of solution-processable transparent electrodes for perovskite solar cells. Carbon based materials have received much attention for use as conducting electrodes for perovskite solar cells, due to their low-cost and high stability. 14,19,20 For example, Li et al.have recently reported semitransparent perovskite solar cells using carbon nanotub...

Fundamental advances to increase the efficiency as well as stability of organic photovoltaics (OPVs) are achieved by designing ternary blends, which represents a clear trend toward multicomponent active layer blends. The development of high‐throughput and autonomous experimentation methods is reported for the effective optimization of multicomponent polymer blends for OPVs. A method for automated film formation enabling the fabrication of up to 6048 films per day is introduced. Equipping this automated experimentation platform with a Bayesian optimization, a self‐driving laboratory is constructed that autonomously evaluates measurements to design and execute the next experiments. To demonstrate the potential of these methods, a 4D parameter space of quaternary OPV blends is mapped and optimized for photostability. While with conventional approaches, roughly 100 mg of material would be necessary, the robot‐based platform can screen 2000 combinations with less than 10 mg, and machine‐learning‐enabled autonomous experimentation identifies stable compositions with less than 1 mg.

The transfer from P3HT based fullerene free OPV lab cells with IDTBR as acceptor material to fully solution processed roll-to-roll compatible modules is reported.