Castor oil-polyurethane elastomers were prepared by reacting poly (1,4-butane diol) (Terathane 1400) with aliphatic 1,6-hexamethylene diisocyanate. The prepolymers were chain-extended with bifunctional precursor chains and/or with castor oil as a trifunctional crosslinker at stoichiometric ratios. These resulted in a series of crosslinked polyurethane elastomers with different structures of the hard segment. The properties of the material were measured by differential scanning calorimetry, thermogravimetric analysis, atomic force microscopy, as well as tensile properties measurements. The effect of stoichiometric balance (i.e., OH/NCO molar ratio) on the final properties was evaluated. The formation of hydrogen bonds was observed by Fourier transform infrared.spectroscopy The measured properties were found to be strongly influenced by the molar ratio of chain extenders to the diisocyanate component. The glass transition temperatures (T g ) for the polyurethanes with OH polyol /NCO/OH chain extender having molar ratios of 1:2:1 and 1:4:3 were found to be -70 and -57°C, respectively. The polyurethanes networks with a OH/NCO molar ratio of 1:2:1 had excellent mechanical properties, indicating that this is the optimum ratio to be used in castor oil polyurethane elastomer formulations. The objective of this work was to study the effect of the castor oil crosslinker on the morphology of the resulting crosslinked polyurethanes and to correlate the morphology with the properties of these bio-based crosslinked polyurethanes.

No abstract

No abstract

No abstract

No abstract