A three-component nanocapsule-based system allows monitoring the health cycle of coatings via autonomous visual highlighting of damages and reversible erasing through healing.

Heat storage for high temperature applications can be performed by several heat storage techniques. Very promising heat storage methods are based on thermochemical gas solid reactions. Most known systems are metal oxide/steam (metal hydroxides), carbon dioxide (metal carbonates), and metal/hydrogen (metal hydrides) systems. These heat storage materials posses high gravimetric and volumetric heat storage densities and because of separation of the reaction products and their storage in different locations heat losses can be avoided. The reported volumetric heat storage densities are 615, 1340 and 1513 [kWh m

No abstract

A hydrogen storage tank based on the metal hydride sodium alanate is coupled with a high temperature PEM fuel cell (HT‐PEM). The waste heat of the fuel cell is used for desorbing hydrogen from the storage tank that in return feeds the fuel cell. ZBT has developed the HT‐PEM fuel cell, Max‐Planck‐Institut für Kohlenforschung the sodium alanate, and IUTA the hydrogen storage tank. During the experiments of the system the fuel cell was operated by load cycling from 165 up to 240 W. Approximately 60 g of hydrogen were delivered from the tank, which was charged with 2676.8 g of sodium alanate doped with 4 mol.% of TiCl3. This amount of hydrogen was desorbed in 3 h and generated a cumulated electrical energy of 660 Wh. In the first cycle 81.5 g of hydrogen were supplied during 3.69 h to the HT‐PEM fuel cell, which was operated nearly constant at 260 W. In the latter case the cumulated electrical energy was 941 Wh.