We report on the continuous wave, room temperature operation of a distributed-feedback laser diode (DFB-LD) with high-order notched gratings. The design, fabrication and characterization of DFB devices, based on the (Al,In)GaN material system, is described. The uncoated devices were mounted into TO packages for characterization and exhibited single wavelength emission at 408.6 nm with an optical power of 20 mW at 225 mA. A side mode suppression ratio (SMSR) of 35 dB was achieved, with a resolution limited full-width at half maximum of 6.5 pm.

Gallium nitride (GaN) laser diodes (LDs) are considered for visible light communications (VLC) in free space, underwater, and in plastic optical fibers (POFs). A review of recent results is presented, showing high-frequency operation of AlGaInN laser diodes with data transmission rates up to 2.5 Gbit/s in free space and underwater and high bandwidths of up to 1.38 GHz through 10 m of plastic optical fiber. Distributed feedback (DFB) GaN LDs are fabricated to achieve single-frequency operation. We report on single-wavelength emissions of GaN DFB LDs with a side-mode suppression ratio (SMSR) in excess of 35 dB.

No abstract

Gallium nitride (GaN) laser diodes are becoming popular sources not only for lighting but for applications ranging from communications to quantum. This paper presents the use of a commercial, off-the-shelf laser diode, with an emission wavelength of 450 nm, for visible light communication, both in free space and for underwater scenarios. Data rates up to 15 Gbit/s have been achieved by making use of orthogonal frequency division multiplexing (OFDM). In addition, distributed feedback (DFB) lasers have been realised emitting at a single wavelength which lend themselves towards applications where high spectral purity is crucial such as atomic clocks or filtered free space transmission systems. These devices have the grating structure etched into the sidewall of the ridge and work is ongoing to measure the linewidth of these lasers with the intended application of cooling Sr+ ions.

eOver the past 20 years, research into Gallium Nitride (GaN) has evolved from LED lighting to Laser Diodes (LDs), with applications ranging from quantum to medical and into communications. Previously, off-the-shelf GaN LDs have been reported with a view on free space and underwater communications. However, there are applications where the ability to select a single emitted wavelength is highly desirable, namely in atomic clocks or in filtered free-space communications systems. To accomplish this, Distributed Feedback (DFB) geometries are utilised. Due to the complexity of overgrowth steps for buried gratings in III-Nitride material systems, GaN DFBs have a grating etched into the sidewall to ensure single mode operation, with wavelengths ranging from 405nm to 435nm achieved. The main motivation in developing these devices is for the cooling of strontium ions (Sr +) in atomic clock applications, but their feasibility for optical communications have also been investigated. Data transmission rates exceeding 1 Gbit/s have been observed in unfiltered systems, and work is currently ongoing to examine their viability for filtered communications. Ultimately, transmission through Wavelength Division Multiplexing (WDM) or Orthogonal Frequency Division Multiplexing (OFDM) is desired, to ensure that data is communicated more coherently and efficiently. We present results on the characterisation of GaN DFBs, and demonstrate their capability for use in filtered optical communications systems.