Abstract-The extreme traffic load that future wireless networks are expected to accommodate requires a re-thinking of the system design. Initial estimations indicate that, different from the evolutionary path of previous cellular generations that was based on spectral efficiency improvements, the most substantial amount of future system performance gains will be obtained by means of network infrastructure densification. By increasing the density of operator-deployed infrastructure elements, along with incorporation of user-deployed access nodes and mobile user devices acting as "infrastructure prosumers", it is expected that having one or more access nodes exclusively dedicated to each user will become feasible, introducing the ultra dense network (UDN) paradigm. Although it is clear that UDNs are able to take advantage of the significant benefits provided by proximal transmissions and increased spatial reuse of system resources, at the same time, large node density and irregular deployment introduce new challenges, mainly due to the interference environment characteristics that are vastly different from previous cellular deployments. This article attempts to provide insights on fundamental issues related to UDN deployment, such as determining the infrastructure density required to support given traffic load requirements and the benefits of networkwise coordination, demonstrating the potential of UDNs for 5G wireless networks.

Numerical evidence suggests that compressive sensing (CS) approaches for wideband massive MIMO channel estimation can achieve very good performance with limited training overhead by exploiting the sparsity of the physical channel. However, analytical characterization of the (minimum) training overhead requirements is still an open issue. By observing that the wideband massive MIMO channel can be represented by a vector that is not simply sparse but has well defined structural properties, referred to as hierarchical sparsity, we propose low complexity channel estimators for the uplink multiuser scenario that take this property into account. By employing the framework of the hierarchical restricted isometry property, rigorous performance guarantees for these algorithms are provided suggesting concrete design goals for the user pilot sequences. For a specific design, we analytically characterize the scaling of the required pilot overhead with increasing number of antennas and bandwidth, revealing that, as long as the number of antennas is sufficiently large, it is independent of the per user channel sparsity level as well as the number of active users. These analytical insights are verified by simulations demonstrating also the superiority of the proposed algorithm over conventional CS algorithms that ignore the hierarchical sparsity property.

We study the problem of indoor localization using commodity WiFi channel state information (CSI) measurements. The accuracy of methods developed to address this problem is limited by the overall bandwidth used by the WiFi device as well as various types of signal distortions imposed by the underlying hardware. In this paper, we propose a localization method that performs channel impulse response (CIR) estimation by splicing measured CSI over multiple WiFi bands. In order to overcome hardware-induced phase distortions, we propose a phase retrieval (PR) scheme that only uses CSI magnitude values to estimate the CIR. To achieve high localization accuracy, the PR scheme involves a sparse recovery step, which exploits the fact that the CIR is sparse over the delay domain, due to the small number of contributing signal paths in an indoor environment. Simulation results indicate that our approach outperforms the state of the art by an order of magnitude (cm-level localization accuracy) for more than 90% of the trials and for various SNR regimes.Index Terms-Indoor localization, ranging, multi-band splicing, phase retrieval, sparse channel impulse response estimation.

The problem of resource allocation (RA) in a downlink OFDMA system is examined under the realistic assumption of imperfect channel state information (CSI) at the base station. In this case, there is a nonzero outage probability that the assigned rate at a particular subcarrier/user pair will not be supported by the true channel realization, which may lead to a significant waste of the system's available resources. It is therefore necessary to obtain RA algorithms that take into account the effect of imperfect CSI. By exploiting the statistical description of the imperfect CSI, various algorithms are proposed that tradeoff complexity versus performance, aiming at maximizing the system's successfully transmitted rate.