No abstract

No abstract

The application of plasma process is growing field covering a wide range of activities, from welding technology, coating technology, deposition technology, manufacturing technology of metal powder, and other important engineering technology. The manufacture of metal powders can be generated from the process of gas atomization, water atomization, plasma atomization, and plasma rotating electrodes process atomization. In the process of plasma atomization provides advantages in addition to producing round powder, it is also very potential for efficient processing and recycling of used and alloy materials, thus saving fuel and essential materials. These operations will have a continuing impact on our industrial society as a whole. The industry of future metal powder manufacturers that utilize plasma atomization technology is an investment strategy that has a great opportunity to grow rapidly. A variety of plasma processes for the manufacture of metal powders will be reviewed in this paper, among others, are plasma atomization and plasma rotating electrodes process atomization. They are all potentially able to control and to produce of metal powders of spherical particles, making it very profitable on powder technology applications. The purpose of this review is to summarize and provide future research for activities in the field of metal powders by plasma atomization processes. The emphasis on plasma engineering technology future research in powder making available for exploration and research needs to be met so that these future research can be realized. Finally, the future challenges of automation from the use of plasma atomization technology for additives manufacturing, powder welding and medical manufacturing.

Titanium has been widely used in biomedical implant applications due to its excellent mechanical properties and biocompatibility. However, manufacturing titanium was quite challenging due to the need for high temperature while having high reactivity. Therefore, spark plasma sintering (SPS) is proposed as an advance rapid sintering technique which allows the fabrication of bulk and porous titanium for biomedical application. This review aims to explore the recent status of titanium alloys prepared by the SPS method. There are two common approaches of titanium development by the SPS method, develop a bulk titanium alloy, or develop porous titanium. The development of titanium for biomedical implant application was done by improving biocompatibility alloy and repair some unsatisfactory mechanical properties. Some low toxicity of titanium alloys (Aluminum free and Vanadium free) had been studied such as Ti–Nb, Ti–Zr, Ti–Ag, Ti–Mg, Ti–Nb–Zr, Ti–Nb–Cu, Ti–Nb–Zr–Ta, etc. SPS was shown to increase the mechanical properties of titanium alloys. However, porous titanium alloys prepared by SPS had gained much attention since it may produce titanium with lower elastic modulus in such a short time. Low elastic modulus is preferable for implant material because it can reduce the risk of implant failure due to the stress-shielding effect. Besides mechanical properties, some corrosion resistance and the biocompatibility of titanium are also reviewed in this paper.

Engineering a cell-friendly material in a form of lab-on-chip is the main goal of this study. The chip was made of polydimethyl siloxane (PDMS) with a surface modification to realize a groovy structure on its surface. This groovy surface was naturally and randomly designed via biomachining process. This measure was aimed to improve the cell attachment on the PDMS surface that always known as hydrophobic surface. The biomachined surface of mold and also products were characterized as surface roughness and wettability. The result shows that the biomachining process were able to be characterized in three classes of roughness on the surface of PDMS.