No abstract

We performed multiple-pass cold drawing for pure Mg wire which showed excellent formability (~138% accumulative true strain) at room temperature. Different from the continuous work hardening occurring during cold drawing of Mg alloy wires, for pure Mg, an initially rapid increase in hardness and strength was followed by significant work softening and finally reached a steady-state level, approximately 40~45 HV. The work softening can be attributed to the dynamic recovery and recrystallization of pure Mg at room temperature. Meanwhile, an abrupt change in texture component also was detected with the transition from work hardening to softening in the strain range of 28~34%. During the whole drawing, the strongest texture component gradually transformed from as-extruded basal to <101¯0> fiber (~28% accumulative true strain), and then rapidly returned to the weak basal texture.

Spontaneous strains during martensitic transformation and magnetic-field-induced transformation have been systemically studied for Ni46Cu4Mn38Sn12 Heusler alloy, respectively. A large spontaneous strain with the value of about 0.12% upon martensitic transformation has been observed in this alloy, which is almost three times larger than that in ternary Ni–Mn–Sn alloy. In addition, such a value of strain can be obtained through a fully reverse martensitic transformation induced by a field of about 45 kOe, exhibiting a considerable metamagnetic shape memory effect without any prestrain. This behavior can be attributed to magnetoelastic coupling between stable martensite and metastable fraction of austenite.

No abstract