No abstract

Manufacturing industries are one of the important emission sectors of anthropogenic volatile organic compounds (VOCs). In this study, VOC emission factors, relative ozone formation potential (ROFP) and relative carcinogenic risk (RCR) were estimated for manufacturing industries (n=13) located in central Taiwan. Emission samples were collected in stainless steel canisters and were analyzed with a system of gas chromatography-mass spectroscopy. Higher emission factors of total VOCs (∑VOCs) were observed for stencil printing (423 mg-VOC kg-1) compared to other emission industries. Alkanes constituted the most prominent group of VOCs for steel foundry (42%), aluminum foundry (25%) and synthetic resin industries (25%). Oxygenated VOCs were the most abundant group in the organic solvent (80%), polyester resin (80%) and polyurethane (75%) industries. Moreover, emissions from acrylic resin manufacturing had a major contribution from aromatic compounds (> 95%). Toluene was the topmost compound in terms of its contribution to ∑VOCs in plastic tape manufacturing (44%), aluminum foundry (40%), steel foundry (12%), plastic coating (64%) and stencil printing (35%). Analysis of ozone formation potentials showed that the metal product and machinery acrylic resin manufacturing and stencil printing had a higher normalized relative ozone formation potential (ROFP) index and belonged to Level-I emission sources. However, in terms of the relative carcinogenic risk (RCR), integrated iron and steel manufacturing had the highest normalized RCR index that belonged to level-I emission sources. Level-I represents the most important VOC emission sources. This study provides a reactivity- and carcinogenicity-based approach to identify high-priority VOC emission sources. The results of this study would help formulate emission reduction policies and strategies for manufacturing industries.

Manufacturing industries are one of the important emission sectors of anthropogenic volatile organic compounds (VOCs). In this study, VOC emission factors, relative ozone formation potential (ROFP) and relative carcinogenic risk (RCR) were estimated for some important manufacturing industries (n = 13) located in central Taiwan. Emission samples were collected in stainless steel canisters and were analyzed with a system of gas chromatography-mass spectroscopy. Higher emission factors of total VOCs (∑VOCs) were observed for stencil printing (423 mg-VOC kg-1) compared to other emission industries. Alkanes constituted the most prominent group of VOCs for steel foundry (41.6%), aluminum foundry (25.1%) and synthetic resin industries (25.0%). Oxygenated VOCs were obtained as the most abundant group in the organic solvent (80.3%), polyester resin (80.0%) and PU leather (75.0%) industries. Moreover, emissions from acrylic resin manufacturing had higher contributions from aromatic compounds (> 95%). Toluene was the topmost compound in terms of its contribution to ∑VOCs in plastic tape manufacturing (44.4%), aluminum foundry (39.6%), steel foundry (11.6%), plastic coating (64.3%) and stencil printing (35.3%). Analysis of ozone formation potentials showed that the metal product and machinery acrylic resin manufacturing and stencil printing had a higher normalized ROFP index and belonged to Level-I emission sources. However, in terms of the RCR, integrated iron and steel manufacturing had the highest normalized RCR index belonged to level-I emission sources. Level-I represents the most important VOC emission sources. This study provides a reactivity- and carcinogenicity-based approach to identify high-priority VOC emission sources. The results of this study would help formulate emission reduction policies and strategies for manufacturing industries.

In this study, a few important manufacturing industries located in Central Taiwan were studied (n = 13) for the emission of volatile organic compounds (VOCs), relative ozone formation potential (ROFP) and relative carcinogenic risk (RCR). Higher emission factors of total VOCs (∑VOCs) were observed for stencil printing (423 mg-VOC kg-1) compared to other emission sectors. Alkanes formed the most dominant group of VOCs for steel foundry (41.6%), aluminum foundry (25.1%) and synthetic resin manufacturing (25.0%). However, for the chemical sector (synthetic and polyester resin), oxygenated organics like acetone (55.7%) and ethyl acetate (79.7%) were the predominant VOCs. Moreover, emissions from acrylic resin manufacturing had higher contributions from aromatic compounds (> 95%). Toluene was the topmost compound in terms of its contribution to ∑VOCs in plastic tape manufacturing (44.4%), aluminum foundry (39.6%), steel foundry (11.6%), plastic coating (64.3%) and stencil printing (35.3%). Analysis of ozone formation potentials showed that the metal product & machinery acrylic resin manufacturing and stencil printing had a higher normalized ROFP index and belonged to level-I emission sources. However, in terms of the RCR, integrated iron & steel manufacturing had the highest normalized RCR index belonged to level-I emission sources. Level-I represents the most important VOC emission sources.