Municipal solid waste (MSW) is one of the top contributors in greenhouse gas (i.e. methane) emissions - particularly from landfill disposals. However, it could be a remarkable source of renewable energy. In Bangladesh, generation of municipal solid waste is at least 2.7 million tonne per year in the major cities, implying a heavy environmental burden. On the other hand, there are several coal-based power plants are in the pipeline to meet the increasing energy demand in Bangladesh with the potential of significant CO2 emission. To find a remedy to the above situation, a power plant using Integrated Gasification and Combustion Cycle (IGCC) technology with pre-combustion carbon capture is considered in this study. IGCC has the advantage of producing high quality syngas from a wide variety of feed and assists in the capture of CO2 at a lower cost while providing high electric efficiency. The power plant was simulated by commercial simulation packages (Aspen PLUS™ and Aspen HYSYS™) using MSW and bituminous coal (Indonesian) as a combined feed. With a feed rate of 1800 tonne per day, Syngas produced from an entrained flow type gasifier was then treated for CO2 removal using mono-ethanol amine (MEA) solvent after necessary shift in a high temperature shift reactor. About 91% efficiency was achieved in the shift reactor while the CO2 capture efficiency was varied for this study from 30% to 85%. Further parametric variation was studied by varying the moisture content of MSW and MSW to coal feed ratio. Through combustion of the H2 rich syngas in a gas turbine and subsequent steam cycle with reheat resulted in 125 MW of electricity at an efficiency of 28.95% while capturing 50% of the CO2 generated in the process for an MSW to Coal feed ratio of 1:1. With variation in moisture content especially during monsoon season, the plant efficiency could be affected remarkably. On the other hand, it was observed that the energy requirement varied from 6 to 8 MW for every 10% increase in CO2 capture quantity. Overall, by capturing 50% of the generated CO2, it is possible to reduce the emission of a same size ultra-supercritical coal-based power plant from about 700 kg CO2/MWh to about 360 kg of net CO2/MWh incorporating co-feeding and pre-combustion capture in an IGCC power plant. Chemical Engineering Research Bulletin 21(2020) 37-42

No abstract

Producing hydrochar from landfill municipal solid wastes (MSW) is a sustainable alternative to existing waste management practices in low-and middle-income countries. In this study, mixed MSW feedstock (sent for landfilling) was subjected to hydrothermal carbonization to produce hydrochars. The hydrochar showing the highest heating value was subjected to pyrolysis at 5, 10, and 20 K min −1 heating rates. Based on the pyrolysis characteristics, a three pseudo-component-based distributed activation energy model was employed to describe the pyrolysis kinetics. The activation energy distributions for the three pseudo-components were 140 ± 8.7 kJ mol −1 , 190 ± 1 kJ mol −1 and 175.9 ± 24.9 kJ mol −1 , which were able to predict the pyrolysis profile at all heating rates with R 2 > 0.999. Differential thermogravimetric profiles of the hydrochar revealed its pyrolytic reactivity to resemble lignocellulosic constituents. Fouriertransform infrared analysis of the hydrochar showed retention of oxygen-containing functional groups (associated with lignocellulosic constituents) from the parent feedstock.