No abstract

No abstract

Abstract. In this paper, a voltage mode multifunction filter based on single voltage differencing differential difference amplifier (VDDDA) is presented. The proposed filter with three input voltages and single output voltage is constructed with single VDDDA, two capacitors and two resistors. Its quality factor can be adjusted without affecting natural frequency. Also, the natural frequency can be electronically tuned via adjusting of bias current. The filter can offer five output responses, high-pas (HP), band-pass (BP), band-reject (BR), low-pass (LP) and all-ass (AP) functions in the same circuit topology. The output response can be selected by choosing the suitable input voltage without the component matching condition and the requirement of additional double gain voltage amplifier. PSpice simulation results to confirm an operation of the proposed filter correspond to the theory.

In this contribution, the realization of a first-order, two-input, single-output voltage-mode multifunction filter employing a second-generation voltage conveyor (VCII) is described. The proposed first-order versatile filter is extremely simple, composed of a single VCII and three passive devices. Because of its low output impedance, the output voltage node can be easily cascaded with other voltage-mode configurations without the requirement of any buffers. In the same circuit topology, the proposed firstorder filter provides various filtering functions: inverting and non-inverting low-pass (LPF), inverting and non-inverting high-pass (HPF), as well as inverting and non-inverting all-pass (APF). The digital method allows the selection of output first-order filtering functions without the need for additional circuits such as inverting or double-gain amplifiers. Furthermore, the pass-band gain of the low-pass and high-pass responses can be adjusted by varying the resistance or capacitance values without influencing the pole frequency as well as the phase response. The influence of VCII's current/voltage gain errors and parasitic elements on filtering performance is also investigated. Moreover, the modification of the proposed lagging phase allpass filter to achieve electronic controllability is also proposed by replacing the passive resistor with the operational transconductance amplifier (OTA). The 0.18µm TSMC CMOS structure of the VCII employed in the proposed filter operates in the subthreshold region and utilizes the bulk-driven technique (BD), enabling it to operate with 0.4V supply voltage and consuming 383 nW of power. The total harmonic distortion (THD) of the LPF with an applied input voltage V inpp =300mV @ 50Hz is -49.5 dB. An application example as a quadrature sinusoidal oscillator realized from the proposed first-order allpass filter and lossless integrator is also included. The performance of the proposed reconfigurable voltage-mode first-order filter is simulated and experimentally tested using a commercially available AD844 IC-based VCII with ±5 V power supply.INDEX TERMS First-order filter, second-generation voltage conveyor, low-voltage, low-power CMOS.The associate editor coordinating the review of this manuscript and approving it for publication was Yuh-Shyan Hwang . PIYA SUPAVARASUWAT received the B.S.I.Ed. degree in telecommunication engineering from the King Mongkut's Institute of Technology Ladkrabang (KMITL), Thailand, in 1996, the M.Eng. degree in electrical engineering from the King Mongkut's University of Technology North Bangkok (KMUTNB), in 2003, and the D.Eng. degree in electrical engineering from KMITL, in 2017. He has been a Lecturer with the