No abstract

No abstract

No abstract

Nanoglass (NG) as a new structure-tunable material has been investigated using both experiments and computational modeling. Experimentally, inert gas condensation (IGC) is commonly employed to prepare metallic glass (MG) nanoparticles that are consolidated using cold compression to generate an NG. In computational modeling, various methods have been used to generate NGs. However, due to the high computational cost involved, heretofore modeling investigations have not followed the experimental synthesis route. In this work, we use molecular dynamics simulations to generate an NG model by consolidating IGC-prepared Cu64Zr36 nanoparticles following a workflow similar to that of experiments. The resulting structure is compared with those of NGs produced following two alternative procedures previously used: direct generation employing Voronoi tessellation and consolidation of spherical nanoparticles carved from an MG sample. We focus on the characterization of the excess free volume and the Voronoi polyhedral statistics in order to identify and quantify contrasting features of the glass-glass interfaces in the three NG samples prepared using distinct methods. Results indicate that glass-glass interfaces in IGC-based NGs are thicker and display higher structural contrast with their parent MG structure. Nanoparticle-based methods display excess free volume exceeding 4%, in agreement with experiments. IGC-prepared nanoparticles, which display Cu segregation to their surfaces, generate the highest glass-glass interface excess free volume levels and the largest relative interface volume with excess free volume higher than 3%. Voronoi polyhedral analysis indicates a sharp drop in the full icosahedral motif fraction in the glass-glass interfaces in nanoparticle-based NG as compared to their parent MG.

Here, a prototypical metallic nanoglass is proposed as a new alloy for balloon expandable stents. Traditionally, the stainless steel SS 316L alloy has been used as a preferred material for this application due to its proper combination of mechanical properties, corrosion resistance, and biocompatibility. Recently, metallic glasses (MGs) have been considered as promising materials for biodevice applications. MGs often display outstanding mechanical properties superior to those of conventional metallic alloys and overcome some of the weaknesses of SS 316L, such as radiopacity, stainless steel allergy, and thrombosis‐induced restenosis. However, commonly used monolithic MGs, which have an amorphous homogeneous microstructure, suffer from lack of ductility that is necessary for deployment of balloon expandable stents. In contrast, nanoglasses, that is, amorphous alloys with heterogeneous microstructure, exhibit enhanced ductility which makes them promising materials for balloon expandable stents. We evaluate the feasibility of a prototypical Zr64Cu36 nanoglass with a grain size of 5 nm for balloon expandable stents by performing finite element method modeling of the stent deployment process in a coronary artery. We consider the BX‐Velocity stent design and the nanoglass mechanical properties calculated from atomistic simulations. The results suggest that nanoglasses are suitable materials for balloon expandable stent applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:73–79, 2020.