We propose a silicon-on-insulator (SOI) photonic crystal waveguide within a hexagonal lattice of elliptical air holes for slow light propagation with group velocity in the range 0.0028c to 0.044c and ultra-flattened group velocity dispersion (GVD). The proposed structure is also investigated for its application as an optical buffer with a large value of normalized delay bandwidth product (DBP), equal to 0.778. Furthermore it is shown that the proposed structure can also be used for time or wavelength-division demultiplexing to separate two telecom wavelengths, 1.31 microm and 1.55 microm, on a useful time-scale and with minimal distortion.

In the present paper, we have utilized the concept of photonic crystals for the implementation of an optical NOT gate inverter. The designed structure has a hexagonal arrangement of silicon rods in air substrate. The logic function is based on the phenomenon of the existence of the photonic bandgap and resulting guided modes in defect photonic crystal waveguides. We have plotted the transmission, extinction ratio, and tolerance analysis graphs for the structure, and it has been observed that the maximum output is obtained for a telecom wavelength of 1.554 μm. Dispersion curves are obtained using the plane wave expansion method, and the transmission is simulated using the finite element method. The proposed structure is applicable for photonic integrated circuits due to its simple structure and clear operating principle.

No abstract

Abstract. The effects of the slow-down factor on third-order nonlinear effects in silicon-oninsulator photonic crystal channel waveguides were investigated. In the slow light regime, with a group index equal to 99, these nonlinear effects are enhanced but the enhancement produced depends on the input peak power level. Simulations indicate the possibility of soliton-like propagation of 1 ps pulses at an input peak power level of 50 mW inside such a photonic crystal waveguide. The increase in the induced phase shift produced by lower group velocities can be used to decrease the size and power requirements needed to operate devices such as optical switches, logic gates, and wavelength translators.