Adsorption of CO on nanosize Pd particles was studied theoretically by density functional method and spectroscopically by means of infrared reflection absorption spectroscopy (IRAS) and sum frequency generation (SFG). A density functional approach was applied to three-dimensional crystallites of about 140 atoms. The model clusters were chosen as octahedral fragments of the face centered cubic (fcc) bulk, exhibiting (111) and (001) facets. Bare and adsorbate-decorated cluster models were calculated with O h symmetry constraints. Various types of adsorption sites were inspected:  3-fold hollow, bridge, and on-top positions at (111) facets; 4-fold hollow and on-top sites at (001) facets; bridge positions at cluster edges; on-top positions at cluster corners; and on single Pd atoms deposited at regular (111) facets. Adsorption properties of the relatively small regular cluster facets (111) and (001) are calculated similar to those of corresponding ideal (infinite) Pd surfaces. However, the strongest CO bonding was calculated for the bridge positions at cluster edges. The energy of adsorption on-top of low-coordinated Pd centers (kinks) is also larger than that for on-top sites of (111) and (001) facets. To correlate the theoretical results with spectroscopic data, vibrational spectra of CO adsorbed on supported Pd nanocrystallites of different size and structure (well-faceted and defect-rich) were measured using IRAS and SFG. For CO adsorption under ultrahigh vacuum conditions, a characteristic absorption in the frequency region 1950−1970 cm-1 was observed, which in agreement with the theoretical data was assigned to vibrations of bridge-bonded CO at particle edges and defects. SFG studies carried out at CO pressures up to 200 mbar showed that the edge-related species was still present under catalytic reaction conditions. By decomposition of methanol leading to the formation of carbon species, these sites can be selectively modified. As a result, CO occupies on-top positions at particle edges and defects. On the basis of the computational data, the experimentally observed differences in CO adsorption on alumina-supported Pd nanoparticles of different size and surface quality are interpreted. Differences between adsorption properties of Pd nanoparticles with a large fraction of (111) facets and adsorption properties of an ideal Pd(111) surface are also discussed.

Metallic nanoparticles finely dispersed over oxide supports have found use as heterogeneous catalysts in many industries including chemical manufacturing, energy-related applications and environmental remediation. The compositional and structural complexity of such nanosized systems offers many degrees of freedom for tuning their catalytic properties. However, fully rational design of heterogeneous catalysts based on an atomic-level understanding of surface processes remains an unattained goal in catalysis research. Researchers have used surface science methods and metal single crystals to explore elementary processes in heterogeneous catalysis. In this Account, we use more realistic materials that capture part of the complexity inherent to industrial catalysts. We assess the impacts on the overall catalytic performance of characteristics such as finite particle size, particle structure, particle chemical composition, flexibility of atoms in clusters, and metal-support interactions. To prepare these materials, we grew thin oxide films on metal single crystals under ultrahigh vacuum conditions and used these films as supports for metallic nanoparticles. We present four case studies on specifically designed materials with properties that expand our atomic-level understanding of surface chemistry. Specifically, we address (1) the effect of dopants in the oxide support on the growth of metal nanoclusters; (2) the effects of size and structural flexibility of metal clusters on the binding energy of gas-phase adsorbates and their catalytic activity; (3) the role of surface modifiers, such as carbon, on catalytic activity and selectivity; and (4) the structural and compositional changes of the active surface as a result of strong metal-support interaction. Using these examples, we demonstrate how studies of complex nanostructured materials can help revealing atomic processes at the solid-gas interface of heterogeneous catalysts. Among our findings is that doping of oxide materials opens promising routes to alter the morphology and electronic properties of supported metal particles and to induce the direct dissociation and reaction of molecules bound to the oxide surface. Also, the small size and atomic flexibility of metal clusters can have an important influence on gas adsorption and catalytic performance.

With a density functional theory method, we studied computationally the size dependence of adsorption properties of metal nanoparticles for CO as a probe on Pd(n) clusters with n = 13-116 atoms. For large particles, the values slowly decrease with cluster size from the asymptotic value for an (ideal) infinite surface. For clusters of 13-25 atoms, starting well above the asymptotic value, the adsorption energies drop quite steeply with increasing cluster size. These opposite trends meet in an intermediate size range, for clusters of 30-50 atoms, yielding the lowest adsorption energies. These computational results help to resolve a controversy on the size-dependent behavior of adsorption energies of metal nanoparticles.

The mechanism of olefin hydrogenation on a supported noble‐metal catalyst requires the presence of weakly bound hydrogen atoms absorbed in the volume of the metal particle (see picture). Co‐adsorbed carbonaceous deposits affect the hydrogen distribution in the metal clusters and critically control their activity and selectivity in olefin conversions.

To identify the nature and the local structure of the surface of supported catalyst nanoparticles, we have performed a detailed comparative study of CO adsorption on two categories of oxide-supported Palladium catalysts:  (1) polycrystalline MgO and γ-Al2O3 supported Pd metal catalysts prepared by impregnation techniques and characterized by different degrees of regularity and perfection and (2) single-crystal based Pd model catalysts prepared under ultrahigh vacuum (UHV) conditions. The assignment of the CO vibrational frequencies to different types of sites on these systems has allowed a detailed structural characterization. For the Pd model catalyst, at low CO coverage, the infrared (IR) reflection absorption spectra closely resemble the expected behavior for terminations by a majority of (111) facets and a minority of (100) facets. The spectral features are indicative of defect sites such as particle steps and edges. Occupation of the defect sites can be affected by surface contaminations such as atomic carbon. Thus the CO spectra at high coverage can be used as both a structural and chemical probe under reaction conditions, provided that complementary information on the particle morphology is available. For the MgO and γ-Al2O3 supported Pd systems, two distinct narrow bands (ν ≅ 2070 and ≅ 1970 cm-1) have been assigned to linearly bonded and bridge-bonded CO species, on Pd (100)/(111) edges or facets, in agreement with the previous results obtained on model catalysts. The broad character of the 2070 cm-1 feature indicates the simultaneous presence of (100) and (111) faces, with edge and corner sites present at their intersection. The high intensity and the small half-width (fwhm) of the band at 1970 cm-1 on a Pd/MgO sample treated at high temperature, assigned to bridge-bonded CO species, suggests that the metal particles expose faces with a high level of regularity. Further spectroscopic features (ν ≅ 1920−1800 cm-1), are ascribed to the presence of different types of 3-fold hollow sites on (111) faces.