Agriculture is one of the important sectors for food supplies. Therefore, a tool for monitoring the agro-environment is important in order to maintain the permanence of agricultural soils. This paper suggests an alternative method for the detection of water content in soils by developing a sensor array with a combination of planar meander and interdigital electromagnetic sensors. The study involved sensor array fabrication using the printed circuit board (PCB) method. The experimental setup consisted of a frequency waveform generator and a signal oscilloscope to collect and analyse the sensors’ output, with VEE Agilent software used to establish the interface. A set of experiments was conducted to determine the relationship between the sensors’ output and the soils’ parameters. The performance of the system was observed where the sensors were tested with the addition of various kinds of soil samples with different concentrations of water content. The sensitivity of the developed sensors was evaluated where the best sensor was selected. Based on the outcomes of the experiments, the Y sensor array placement has the highest sensitivity and can be used to measure the water content in the soils where the data accuracy is compared