No abstract

2D layered germanium selenide (GeSe) with p-type conductivity is incorporated with asymmetric contact electrode of chromium/Gold (Cr/Au) and Palladium/Gold (Pd/Au) to design a self-biased, high speed and an efficient photodetector. The photoresponse under photovoltaic effect is investigated for the wavelengths of light (i.e. ~220, ~530 and ~850 nm). The device exhibited promising figures of merit required for efficient photodetection, specifically the Schottky barrier diode is highly sensitive to NIR light irradiation at zero voltage with good reproducibility, which is promising for the emergency application of fire detection and night vision. The high responsivity, detectivity, normalized photocurrent to dark current ratio (NPDR), noise equivalent power (NEP) and response time for illumination of light (~850 nm) are calculated to be 280 mA/W, 4.1 × 10 9 Jones, 3 × 10 7 W −1 , 9.1 × 10 −12 WHz −1/2 and 69 ms respectively. The obtained results suggested that p-GeSe is a novel candidate for SBD optoelectronics-based technologies. Two-dimensional (2D) materials have chronically been the most widely studied materials, particularly after the successful scotch tape test to exfoliate graphene by Andre Geim and Kostya Novoselov in 2004 1. 2D materials possess excellent electrical and mechanical properties toward diverse electronic device applications. Graphene, being the prototype of 2D materials 2,3 , has been studied broadly for its exotic electrical, optical, and mechanical properties 3,4. Besides, the group-IV transition metal dichalcogenides (TMDs) having a bandgap of around 1 to 2 eV 5-7 have attracted increasing interest because of their promising electronic and optoelectronic device applications 3,8-21. Graphene possesses extremely high carrier mobility (>10 5 cm 2 V −1 s −1), but the absence of band gap limits its electronic and optoelectronic applications 22. Therefore, TMDs with the properties of graphene-like stature, bandgap tunability, weak van der Waals-like forces and stability have intrigued the interest of the scientific community. TMDs are the family of 2D materials having the chemical composition of MX 2 , where M stands for the transition metal elements (M = Mo, W, Ta, Ge…etc) and X for the chalcogen elements (X = Se, S and Te). Among TMDs, Ge-based materials are preferred for applications due to their abundance on earth and environmentally friendly nature 23. With Se, the p-type Germanium from a narrow bandgap semiconductor material as p-GeSe having exciting application in near-infrared (NIR) photodetectors and electron tunnelling devices. p-GeSe has an indirect bandgap of 1.08 eV in the bulk 24,25 , and a direct bandgap of ~1.7 eV in monolayers 24,26,27. Few layers of p-GeSe can be obtained from bulk by mechanical exfoliation method 28. Among the many applications, p-GeSe shows tremendous capability in the realm of photovoltaics, because of its excellent optical, material and electrical properties. Therefore, it is well known as substitution of phosphorene 29. Moreover, GeSe is considered as an amb...

Two-dimensional (2D) heterostructure with atomically sharp interface holds promise for future electronics and optoelectronics because of their multi-functionalities. Here we demonstrate gate-tunable rectifying behavior and self-powered photovoltaic characteristics of novel p-GeSe/n-MoSe2 van der waal heterojunction (vdW HJ). A substantial increase in rectification behavior was observed when the devices were subjected to gate bias. The highest rectification of ~ 1 × 104 was obtained at Vg = − 40 V. Remarkable rectification behavior of the p-n diode is solely attributed to the sharp interface between metal and GeSe/MoSe2. The device exhibits a high photoresponse towards NIR (850 nm). A high photoresponsivity of 465 mAW−1, an excellent EQE of 670%, a fast rise time of 180 ms, and a decay time of 360 ms were obtained. Furthermore, the diode exhibits detectivity (D) of 7.3 × 109 Jones, the normalized photocurrent to the dark current ratio (NPDR) of 1.9 × 1010 W−1, and the noise equivalent power (NEP) of 1.22 × 10–13 WHz−1/2. The strong light-matter interaction stipulates that the GeSe/MoSe2 diode may open new realms in multi-functional electronics and optoelectronics applications.

No abstract

The interface architectures of inorganic–organic halide perovskite‐based devices play key roles in achieving high performances with these devices. Indeed, the perovskite layer is essential for synergistic interactions with the other practical modules of these devices, such as the hole‐/electron‐transfer layers. In this work, a heterostructure geometry comprising transition‐metal dichalcogenides (TMDs) of molybdenum dichalcogenides (MoX2 = MoS2, MoSe2, and MoTe2) and perovskite‐ or hole‐transfer layers is prepared to achieve improved device characteristics of perovskite solar cells (PSCs), X‐ray detectors, and photodetectors. A superior efficiency of 11.36% is realized for the active layer with MoTe2 in the PSC device. Moreover, X‐ray detectors using modulated MoTe2 nanostructures in the active layers achieve 296 nA cm−2, 3.12 mA (Gy cm2)−1 and 3.32 × 10–4 cm2 V−1 s−1 of collected current density, sensitivity, and mobility, respectively. The fabricated photodetector produces a high photoresponsivity of 956 mA W−1 for a visible light source, with an excellent external quantum efficiency of 160% for the perovskite layer containing MoSe2 nanostructures. Density functional theory calculations are made for pure and MoX2 doped perovskites’ geometrical, density of states and optical properties variations evidently. Thus, the present study paves the way for using perovskite‐based devices modified by TMDs to develop highly efficient semiconductor devices.